> -----Original Message----- > From: Holger Brunck [mailto:holger.bru...@keymile.com] > Sent: 20 July 2012 18:04 > To: u-boot@lists.denx.de > Cc: Holger Brunck; Gerlando Falauto; Prafulla Wadaskar; Valentin > Longchamp; Marek Vasut > Subject: [PATCH v3 4/4] arm/km: use kw_sdram_size_adjust to adjust > SDRAM size > > Some boards may differ only in the SDRAM size. This function allows to > fix the size accordingly and we can use the same u-boot binary for > both > boards. > > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > Signed-off-by: Gerlando Falauto <gerlando.fala...@keymile.com> > cc: Prafulla Wadaskar <prafu...@marvell.com> > cc: Valentin Longchamp <valentin.longch...@keymile.com> > cc: Marek Vasut <ma...@denx.de> > --- > chages for v3: > - new patch > > board/keymile/km_arm/km_arm.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/board/keymile/km_arm/km_arm.c > b/board/keymile/km_arm/km_arm.c > index 2b2ca39..9a616fc 100644 > --- a/board/keymile/km_arm/km_arm.c > +++ b/board/keymile/km_arm/km_arm.c > @@ -250,7 +250,7 @@ int board_early_init_f(void) > tmp = readl(KW_GPIO0_BASE + 4); > writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , KW_GPIO0_BASE + 4); > #endif > - > + kw_sdram_size_adjust();
If bank_id is considered then this call will change. Regards... Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
