Hi kqt4at5v, On Sat, Jul 14, 2012 at 04:51:13AM -0500, kqt4a...@gmail.com wrote: > NSA320>> printenv > bootargs=console=ttyS0,115200 > mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) > root=/dev/nfs rw init=/init > bootcmd=nand read.e 0x2000000 $(kernel_addr) 0xA00000; bootm 0x2000000 > bootdelay=2 > baudrate=115200 > loads_echo=0 > eth1addr=00:19:CB:00:51:82 > ipaddr=10.4.50.165 > serverip=10.4.50.5 > rootpath=/mnt/ARM_FS/ > netmask=255.255.255.0 > nandEcc=1bit > MODEL_ID=DD01 > PRODUCT_NAME=NSA-320 > FEATURE_BIT=00 > CONTRY_TYPE=FF > VENDOR_NAME=ZyXEL Communications Corp.
This is not from official uboot. Either your kernel that you are trying to boot is is not good or you did not set serial output correctly. Luka _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
