On 07/09/2012 11:53 AM, Mikhail Kshevetskiy wrote: > This patch allow us to have a universal spl that detects a boot > device and select a corresponding boot algorithm for main u-boot part > (SOC_DA8XX only) > > This patch create copy copy of drivers/mtd/nand/nand_spl_load.c and > drivers/mtd/spi/spi_spl_load.c for the following reasons: > * avoid jump to main u-boot code just after its loading (required > for the next patch: spl - add compressed u-boot image support) > * makes a structure similar to omap3 sources > > Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevets...@gmail.com>
I guess I wasn't clear enough when I asked the series to be split. I want to see this portion turned into: a) Move omap-common spl bits to arch/arm/lib/ b) davinci converted (and as needed, omap3/4/am33xx converted) to be able to use the same code. We shouldn't introduce a new spl_mmc.c for example, we should modify the davinci structure to be able to re-use the same spl_mmc.c code to load/verify and let the next step, as needed happen. I want to see "omap" be able to re-use SPI (since am33xx can do it too, and I've kludged the davinci stuff before) and potentially be able to re-use for example the gunzip support. This I think is the easy set of steps to being able to reuse this fairly common SPL logic outside of not just TI parts but anyone else that wants it. -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
