On Mon, 9 Jul 2012 12:41:06 -0700 Tom Rini <tr...@ti.com> wrote: > On 07/09/2012 11:53 AM, Mikhail Kshevetskiy wrote: > > This patch allow us to have a universal spl that detects a boot > > device and select a corresponding boot algorithm for main u-boot part > > (SOC_DA8XX only) > > > > This patch create copy copy of drivers/mtd/nand/nand_spl_load.c and > > drivers/mtd/spi/spi_spl_load.c for the following reasons: > > * avoid jump to main u-boot code just after its loading (required > > for the next patch: spl - add compressed u-boot image support) > > * makes a structure similar to omap3 sources > > > > Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevets...@gmail.com> > > I guess I wasn't clear enough when I asked the series to be split. I > want to see this portion turned into: > a) Move omap-common spl bits to arch/arm/lib/ > b) davinci converted (and as needed, omap3/4/am33xx converted) to be > able to use the same code. > > We shouldn't introduce a new spl_mmc.c for example, we should modify the > davinci structure to be able to re-use the same spl_mmc.c code to > load/verify and let the next step, as needed happen. I want to see > "omap" be able to re-use SPI (since am33xx can do it too, and I've > kludged the davinci stuff before) and potentially be able to re-use for > example the gunzip support. This I think is the easy set of steps to > being able to reuse this fairly common SPL logic outside of not just TI > parts but anyone else that wants it.
Ok, I'll take this task. Unfortunately I have no too much free time for this job (summer, parents visit, new job and so on), so it may take a month or so. What about other patches? Mikhail > > -- > Tom > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
