Dear Andy Fleming,
In message <1341613933-22669-1-git-send-email-aflem...@freescale.com> you wrote:
> tools/mkenvimage.c: fix basename(3) usage (2012-07-02 20:21:49 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-mpc85xx.git master
>
> Prabhakar Kushwaha (8):
> powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support
> powerpc/mpc85xx:Add BSC9131 RDB Support
> PATCH 1/4][v4] doc:Add documentation for e500 external debugger support
> powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger
> powerpc/85xx:Make debug exception vector accessible
> powerpc/85xx:Fix NAND code base to support debugger
> powerpc/mpc85xx:Add debugger support for e500v2 SoC
> powerpc/mpc85xx:NAND_SPL:Avoid IFC/eLBC Base address setting
>
> Shengzhou Liu (2):
> powerpc/p1010rdb: update mux config of p1010rdb board
> powerpc/p1010rdb: add readme document for p1010rdb
>
> Timur Tabi (4):
> powerpc/85xx: minor clean-ups to the P2020DS board header file
> powerpc/85xx: fdt_set_phy_handle() should return an error code
> powerpc/85xx: clean up P1022DS board configuration header file
> lib/powerpc: addrmap_phys_to_virt() should return a pointer
>
> York Sun (4):
> powerpc/P4080: Check SVR for CPU22 workaround
> powerpc/mpc85xx: Ignore E bit for SVR_SOC_VER()
> powerpc/mpc85xx: Workaround for erratum CPU_A011
> powerpc/mpc85xx: Fix Handling the lack of L2 cache on P2040/P2040E
>
> ramneek mehresh (1):
> powerpc/85xx: Add USB device-tree fixup for various platforms
>
> MAINTAINERS | 2 +
> README | 9 +
> arch/powerpc/cpu/mpc85xx/Makefile | 1 +
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 13 +-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 31 ++-
> arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 32 ++-
> arch/powerpc/cpu/mpc85xx/cpu_init_nand.c | 26 --
> arch/powerpc/cpu/mpc85xx/fdt.c | 11 +-
> arch/powerpc/cpu/mpc85xx/p2041_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/release.S | 39 ++-
> arch/powerpc/cpu/mpc85xx/start.S | 90 ++++++-
> arch/powerpc/cpu/mpc8xxx/cpu.c | 43 +---
> arch/powerpc/include/asm/config_mpc85xx.h | 31 ++-
> arch/powerpc/include/asm/immap_85xx.h | 119 ++++++++-
> arch/powerpc/include/asm/io.h | 2 +-
> arch/powerpc/include/asm/processor.h | 46 +---
> board/freescale/bsc9131rdb/Makefile | 53 ++++
> board/freescale/bsc9131rdb/README | 137 +++++++++
> board/freescale/bsc9131rdb/bsc9131rdb.c | 83 ++++++
> board/freescale/bsc9131rdb/ddr.c | 187 +++++++++++++
> board/freescale/bsc9131rdb/law.c | 31 ++
> board/freescale/bsc9131rdb/tlb.c | 67 +++++
> board/freescale/common/fman.c | 36 ++--
> board/freescale/common/fman.h | 2 +-
> board/freescale/mpc8536ds/mpc8536ds.c | 7 +-
> board/freescale/p1010rdb/README | 212 ++++++++++++++
> board/freescale/p1010rdb/ddr.c | 6 +-
> board/freescale/p1010rdb/p1010rdb.c | 60 +++-
> board/freescale/p1022ds/p1022ds.c | 6 +-
> board/freescale/p1023rds/p1023rds.c | 5 +-
> board/freescale/p1_p2_rdb/ddr.c | 6 +-
> board/freescale/p2020come/p2020come.c | 4 +-
> board/freescale/p2020ds/p2020ds.c | 6 +-
> board/freescale/p2041rdb/p2041rdb.c | 6 +-
> board/freescale/p3060qds/p3060qds.c | 6 +-
> boards.cfg | 1 +
> doc/README.mpc85xx | 166 +++++++++++
> include/addr_map.h | 2 +-
> include/configs/BSC9131RDB.h | 428
> +++++++++++++++++++++++++++++
> include/configs/MPC8536DS.h | 5 +-
> include/configs/P1022DS.h | 48 ++--
> include/configs/P1023RDS.h | 5 +-
> include/configs/P2020COME.h | 6 +-
> include/configs/P2020DS.h | 27 +--
> include/configs/P2041RDB.h | 8 +-
> include/configs/corenet_ds.h | 8 +-
> lib/addr_map.c | 19 +-
> 47 files changed, 1881 insertions(+), 261 deletions(-)
> create mode 100644 board/freescale/bsc9131rdb/Makefile
> create mode 100644 board/freescale/bsc9131rdb/README
> create mode 100644 board/freescale/bsc9131rdb/bsc9131rdb.c
> create mode 100644 board/freescale/bsc9131rdb/ddr.c
> create mode 100644 board/freescale/bsc9131rdb/law.c
> create mode 100644 board/freescale/bsc9131rdb/tlb.c
> create mode 100644 board/freescale/p1010rdb/README
> create mode 100644 doc/README.mpc85xx
> create mode 100644 include/configs/BSC9131RDB.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
EARTH
smog | bricks
AIR -- mud -- FIRE
soda water | tequila
WATER
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
