Dear Holger > -----Original Message----- > From: Holger Brunck [mailto:holger.bru...@keymile.com] > Sent: 13 June 2012 19:03 > To: u-boot@lists.denx.de > Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Thomas > Herzmann > Subject: [PATCH v2 02/14] arm/km: add kmcoge5un board support > > For u-boot this board is similar to mgcoge3un. But some differences > are present. We have a different SDRAM on it and therefore a new > SDRAM config file. Additionaly this board has a direct MAC/MAC > connection from the kirkwood to a marvell simple switch without a > phy inbetween, this needs a new configuration for the mvgbe driver. > The testpin was inverted compared to other km_kirkwood boards, this > is the reason we need the change in post_hotkeys_pressed. > > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> > cc: Prafulla Wadaskar <prafu...@marvell.com> > > Signed-off-by: Thomas Herzmann <thomas.herzm...@keymile.com> > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > --- > changes for v2: > - rename KMCOGE5UN to KM_COGE5UN > - rename 256M8-1.cfg -> kwbimage_256M8_1.cfg > - squash 17/20 arm/km: fix testpin detection for kmcoge5un into this > commit because it should come with the board support patch > > MAINTAINERS | 1 + > board/keymile/km_arm/km_arm.c | 4 + > board/keymile/km_arm/kwbimage_256M8_1.cfg | 296 > +++++++++++++++++++++++++++++
There is anther file coming in patch 01/14 i.e. board/keymile/km_arm/kwbimage_128M16_1.cfg | 296 ++++++++++++++++++++++++++++ I think the change is only RAM size supported, this must be effectively managed using post-configuration in the function board_early_init_f() Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
