On 06/20/2012 09:24 PM, Jim Lin wrote: > A known hardware issue of USB1 port where bit 1 (connect status > change) of PORTSC register will be set after issuing Port Reset > (like "usb reset" in u-boot command line). > This will be treated as an error and stops later device enumeration. > > Therefore we clear that bit after Port Reset in order to proceed > later device enumeration. > > Signed-off-by: Jim Lin <ji...@nvidia.com>
Acked-by: Stephen Warren <swar...@wwwdotorg.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
