Use the same name as defined in the datasheet.
DSP_CLK -> DISP_CLK
Signed-off-by: Ashok Kumar Reddy Kourla <ashokkourla2...@gmail.com>
---
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
index afaa068..377d97f 100644
--- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
@@ -530,8 +530,8 @@ enum {
MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1,
0x0000, 0, 0),
MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5,
0x0000, 0, 0),
MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6,
0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 0,
0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 1,
0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0,
0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1,
0x0000, 0, 0),
MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3,
0x0000, 0, 0),
MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4,
0x0000, 0, 0),
MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5,
0x0000, 0, 0),
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
