[U-Boot] [PATCH v2 06/19] tegra: Add display support to funcmux

[Simon Glass]

Add support for a default pin mapping for display1.

Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Use const where possible in funcmux

 arch/arm/cpu/armv7/tegra2/funcmux.c |   39 +++++++++++++++++++++++++++++++++++
 1 files changed, 39 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/tegra2/funcmux.c 
b/arch/arm/cpu/armv7/tegra2/funcmux.c
index 0ef7753..9a339cd 100644
--- a/arch/arm/cpu/armv7/tegra2/funcmux.c
+++ b/arch/arm/cpu/armv7/tegra2/funcmux.c
@@ -25,6 +25,31 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 
+/*
+ * The PINMUX macro is used to set up pinmux tables.
+ */
+#define PINMUX(grp, mux, pupd, tri)                   \
+       {PINGRP_##grp, PMUX_FUNC_##mux, PMUX_PULL_##pupd, PMUX_TRI_##tri}
+
+static const struct pingroup_config disp1_default[] = {
+       PINMUX(LDI,   DISPA,      NORMAL,    NORMAL),
+       PINMUX(LHP0,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LHP1,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LHP2,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LHS,   DISPA,      NORMAL,    NORMAL),
+       PINMUX(LM0,   RSVD4,      NORMAL,    NORMAL),
+       PINMUX(LPP,   DISPA,      NORMAL,    NORMAL),
+       PINMUX(LPW0,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LPW1,  RSVD4,      NORMAL,    TRISTATE),
+       PINMUX(LPW2,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LSC0,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LSPI,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LVP1,  DISPA,      NORMAL,    NORMAL),
+       PINMUX(LVS,   DISPA,      NORMAL,    NORMAL),
+       PINMUX(SLXD,  SPDIF,      NORMAL,    NORMAL),
+};
+
+
 int funcmux_select(enum periph_id id, int config)
 {
        int bad_config = config != FUNCMUX_DEFAULT;
@@ -185,6 +210,20 @@ int funcmux_select(enum periph_id id, int config)
                        break;
                }
 
+       case PERIPH_ID_DISP1:
+               if (config == FUNCMUX_DEFAULT) {
+                       int i;
+
+                       for (i = PINGRP_LD0; i <= PINGRP_LD17; i++) {
+                               pinmux_set_func(i, PMUX_FUNC_DISPA);
+                               pinmux_tristate_disable(i);
+                               pinmux_set_pullupdown(i, PMUX_PULL_NORMAL);
+                       }
+                       pinmux_config_table(disp1_default,
+                                           ARRAY_SIZE(disp1_default));
+               }
+               break;
+
        default:
                debug("%s: invalid periph_id %d", __func__, id);
                return -1;
-- 
1.7.7.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot