Albert,
On Thu, May 31, 2012 at 9:47 AM, Tom Warren <twarren.nvi...@gmail.com> wrote:
> Albert,
>
> Please pull u-boot-tegra/master into ARM master. Thanks!
Haven't seen a reply, so repinging you.
Thanks,
Tom
>
> The following changes since commit 2ca4a209a5b961ad1be8782c68dabe326d77dfaf:
> SRICHARAN R (1):
> OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-tegra master
>
> Lucas Stach (2):
> tegra: sync SDIO1 pingroup enum name with TRM
> tegra: add SDIO1 funcmux entry for UARTA
>
> Simon Glass (1):
> tegra: Correct PLL access in ap20.c and clock.c
>
> Stephen Warren (22):
> tegra: paz00: fix typo in SD slot CD detect GPIO
> tegra: add alternate UART1 funcmux entry
> tegra: Whistler board support
> tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS
> tegra: flesh out bootcmd
> tegra: whistler: reduce and comment network cfg options
> tegra: seaboard: add support for USB networking
> tegra: add UART1 on GPU funcmux entry
> tegra: add SDMMC1 on SDIO1 funcmux entry
> tegra: Compulab TrimSlice board support
> tegra: harmony: add device tree support
> tegra: paz00: add device tree support
> tegra: remove CONFIG_USB_ETHER_SMSC95XX from boards without it
> tegra: ventana: add own device tree, enable USB
> env_mmc: align buffers using ALLOC_CACHE_ALIGN_BUFFER
> sf: winbond: Add support for the Winbond W25Q80BL
> tegra: ventana: store environment in eMMC
> tegra: whistler: store environment in eMMC
> tegra: trimslice: store environment in SPI flash
> tegra: paz00: store environment in eMMC
> tegra: seaboard: disable SPI, move environment to eMMC
> tegra: trimslice: fix a couple typos
>
> Tom Warren (6):
> spi: Tegra2: Seaboard: fix UART corruption during SPI transactions
> spi: Tegra2: Seaboard: enable SPI/UART corruption fix
> spi: tegra2: rename tegra2_spi.* to tegra_spi.*
> mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*
> gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*
> arm: Tegra: Use ODMDATA from BCT in IRAM
>
> amar...@nvidia.com (1):
> tegra: override compiler flags for low level init code
>
> MAINTAINERS | 2 +
> arch/arm/cpu/armv7/tegra2/ap20.c | 28 ++++-
> arch/arm/cpu/armv7/tegra2/board.c | 18 +++-
> arch/arm/cpu/armv7/tegra2/clock.c | 4 +-
> arch/arm/cpu/armv7/tegra2/config.mk | 7 +-
> arch/arm/cpu/armv7/tegra2/funcmux.c | 30 +++++-
> arch/arm/include/asm/arch-tegra2/clock.h | 5 +-
> arch/arm/include/asm/arch-tegra2/funcmux.h | 4 +
> arch/arm/include/asm/arch-tegra2/gpio.h | 7 +-
> arch/arm/include/asm/arch-tegra2/pinmux.h | 2 +-
> arch/arm/include/asm/arch-tegra2/tegra2.h | 4 +
> .../asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h} | 9 +-
> arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 4 +-
> board/compal/dts/tegra2-paz00.dts | 57 ++++++++++
> board/compal/paz00/paz00.c | 12 +-
> board/compulab/dts/tegra2-trimslice.dts | 57 ++++++++++
> board/compulab/trimslice/Makefile | 49 ++++++++
> board/compulab/trimslice/trimslice.c | 73 ++++++++++++
> board/nvidia/common/uart-spi-switch.c | 29 ++----
> board/nvidia/dts/tegra2-harmony.dts | 57 ++++++++++
> board/nvidia/dts/tegra2-ventana.dts | 57 ++++++++++
> board/nvidia/dts/tegra2-whistler.dts | 67 +++++++++++
> board/nvidia/harmony/harmony.c | 4 +-
> board/nvidia/seaboard/seaboard.c | 4 +-
> board/nvidia/whistler/Makefile | 48 ++++++++
> board/nvidia/whistler/whistler.c | 116 +++++++++++++++++++
> boards.cfg | 2 +
> common/env_mmc.c | 10 +-
> drivers/gpio/Makefile | 2 +-
> drivers/gpio/{tegra2_gpio.c => tegra_gpio.c} | 2 +-
> drivers/mmc/Makefile | 2 +-
> drivers/mmc/{tegra2_mmc.c => tegra_mmc.c} | 4 +-
> drivers/mmc/{tegra2_mmc.h => tegra_mmc.h} | 8 +-
> drivers/mtd/spi/winbond.c | 8 ++
> drivers/spi/Makefile | 2 +-
> drivers/spi/{tegra2_spi.c => tegra_spi.c} | 17 +++-
> include/configs/harmony.h | 29 ++++-
> include/configs/medcom.h | 6 +-
> include/configs/paz00.h | 34 +++++-
> include/configs/plutux.h | 6 +-
> include/configs/seaboard.h | 35 +++---
> include/configs/tegra2-common-post.h | 117
> ++++++++++++++++++++
> include/configs/tegra2-common.h | 10 +--
> include/configs/trimslice.h | 99 +++++++++++++++++
> include/configs/ventana.h | 29 ++++-
> include/configs/whistler.h | 94 ++++++++++++++++
> 46 files changed, 1150 insertions(+), 120 deletions(-)
> rename arch/arm/include/asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h} (95%)
> create mode 100644 board/compal/dts/tegra2-paz00.dts
> create mode 100644 board/compulab/dts/tegra2-trimslice.dts
> create mode 100644 board/compulab/trimslice/Makefile
> create mode 100644 board/compulab/trimslice/trimslice.c
> create mode 100644 board/nvidia/dts/tegra2-harmony.dts
> create mode 100644 board/nvidia/dts/tegra2-ventana.dts
> create mode 100644 board/nvidia/dts/tegra2-whistler.dts
> create mode 100644 board/nvidia/whistler/Makefile
> create mode 100644 board/nvidia/whistler/whistler.c
> rename drivers/gpio/{tegra2_gpio.c => tegra_gpio.c} (99%)
> rename drivers/mmc/{tegra2_mmc.c => tegra_mmc.c} (99%)
> rename drivers/mmc/{tegra2_mmc.h => tegra_mmc.h} (97%)
> rename drivers/spi/{tegra2_spi.c => tegra_spi.c} (95%)
> create mode 100644 include/configs/tegra2-common-post.h
> create mode 100644 include/configs/trimslice.h
> create mode 100644 include/configs/whistler.h
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
