> -----Original Message----- > From: Simon Guinot [mailto:simon.gui...@sequanux.org] > Sent: 16 May 2012 19:51 > To: Prafulla Wadaskar > Cc: Albert ARIBAUD; u-boot@lists.denx.de; Simon Guinot > Subject: [PATCH 5/6] ARM: add support for Network Space v2 Lite and > Mini > > This patch adds support for the LaCie boards Network Space v2 (Lite > and > Mini). This two boards are derived from the Network Space v2 and a lot > of hardware caracteristics are shared. > > - CPU: Marvell 88F6192 800Mhz > - SDRAM memory: 128MB DDR2 200Mhz > - 1 SATA port: internal > - Gigabit ethernet: PHY Marvell 88E1318 > - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) > - i2c EEPROM: 512 bytes (24C04 type) > - 2 USB2 ports (Lite only): host and host/device > - 1 push button > - 1 SATA LED (bi-color, blue and red) > > Signed-off-by: Simon Guinot <simon.gui...@sequanux.org> > --- > arch/arm/include/asm/mach-types.h | 13 +++
I think the updates to this file to be done by ARM maintainer. > board/LaCie/common/common.c | 36 ++++++- > board/LaCie/common/common.h | 1 + > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 > +++++++++++++++++++++++++++++ > board/LaCie/netspace_v2/netspace_v2.c | 4 + > boards.cfg | 2 + > include/configs/lacie_kw.h | 26 ++++- > 7 files changed, 237 insertions(+), 7 deletions(-) > create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg Again, can the current cfg files be reused? Instead of adding new? Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
