Hi, Please correct me if I am wrong. From what I understand, u-boot itself is relocated to RAM by calling the procedure: relocate_code at the end of the procedure: board_init_f . There is a need for me to load an executable to a static address (say, 0x82xx_xxxx) in RAM such that control could be passed to this executable from U-boot. How could this be accomplished, with the limitation that: the executeable is to be downloaded together with u-boot.bin, zImage, ramdisk and other images that are to be be executed before u-boot etc, as a blob onto the eMMC? Could u-boot be used to relocate the said executable to the address: 0x82xx_xxxx? u-boot does not have the knowledge where this executable resides in eMMC. This also means that it would not be possible to use u-boot command: cp (memory copy) to do the relocation, as the command itself requires knowledge of the source address. Any comment or suggestions would be greatly appreciated. Thanks, Ivan
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
