This patches support drawing 32bpp bitmap TIZEN logo in exynos fb.
trats_logo.h data is compressed from trats_logo.bmp to
trats_logo.bmp.gz by gzip and converted to trats_logo.h header file
format by some application. And then it is decomressed at the exynos
fb driver by gunzip_bmp().
change of v1:
- set CONFIG_SYS_VIDEO_LOGO_MAX_SIZE bigger than BMP header file size.
- drawing logo when boot_logo_on variable sets in board file.
- move trats_logo* header file to another patch.
- set RGB order depending on file format in board file.
- and so on.
Signed-off-by: Donghwa Lee <dh09....@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---
board/samsung/trats/trats.c | 12 ++++++++++++
drivers/video/exynos_fb.c | 33 +++++++++++++++++++++++++++++++++
drivers/video/exynos_fb.h | 7 -------
drivers/video/exynos_fimd.c | 2 +-
include/configs/trats.h | 5 ++++-
include/lcd.h | 4 ++++
6 files changed, 54 insertions(+), 9 deletions(-)
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 084b67a..9d75b8f 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -37,6 +37,7 @@
#include <pmic.h>
#include <usb/s3c_udc.h>
#include <max8997_pmic.h>
+#include <tizen_logo_data.h>
#include "setup.h"
@@ -455,6 +456,13 @@ static int mipi_power(void)
return 0;
}
+enum exynos_fb_rgb_mode_t {
+ MODE_RGB_P = 0,
+ MODE_BGR_P = 1,
+ MODE_RGB_S = 2,
+ MODE_BGR_S = 3,
+};
+
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 720,
@@ -489,6 +497,10 @@ vidinfo_t panel_info = {
.reset_delay = 0,
.interface_mode = FIMD_RGB_INTERFACE,
.mipi_enabled = 1,
+ .boot_logo_on = 1,
+ .rgb_mode = MODE_BGR_P,
+ .logo_height = TIZEN_LOGO_HEIGHT,
+ .logo_width = TIZEN_LOGO_WIDTH,
};
void init_panel_info(vidinfo_t *vid)
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index 96a8ec1..f669b65 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -32,6 +32,10 @@
#include "exynos_fb.h"
+#ifdef CONFIG_TRATS
+#include <tizen_logo.h>
+#endif
+
int lcd_line_length;
int lcd_color_fg;
int lcd_color_bg;
@@ -64,6 +68,29 @@ static void exynos_lcd_init(vidinfo_t *vid)
exynos_fimd_lcd_init(vid);
}
+static void draw_logo(void)
+{
+ int x, y;
+ bmp_image_t *bmp;
+ ulong addr, len;
+ unsigned int logo_width, logo_height;
+
+ logo_width = panel_info.logo_width;
+ logo_height = panel_info.logo_height;
+ x = ((panel_width - logo_width) >> 1);
+ y = ((panel_height - logo_height) >> 1) - 4;
+
+ addr = (ulong)logo;
+ bmp = (bmp_image_t *)addr;
+
+ if (!((bmp->header.signature[0] =='B') &&
+ (bmp->header.signature[1] =='M'))) {
+ addr = (ulong)gunzip_bmp(addr, &len);
+ }
+
+ lcd_display_bitmap((ulong)addr, x, y);
+}
+
static void lcd_panel_on(vidinfo_t *vid)
{
udelay(vid->init_delay);
@@ -115,6 +142,12 @@ void lcd_ctrl_init(void *lcdbase)
void lcd_enable(void)
{
+ if (panel_info.boot_logo_on) {
+ memset(lcd_base, 0, panel_width * panel_height *
+ (NBITS(panel_info.vl_bpix) >> 3));
+ draw_logo();
+ }
+
lcd_panel_on(&panel_info);
}
diff --git a/drivers/video/exynos_fb.h b/drivers/video/exynos_fb.h
index 66f5da6..4ff2efd 100644
--- a/drivers/video/exynos_fb.h
+++ b/drivers/video/exynos_fb.h
@@ -27,13 +27,6 @@
#define MAX_CLOCK (86 * 1000000)
-enum exynos_fb_rgb_mode_t {
- MODE_RGB_P = 0,
- MODE_BGR_P = 1,
- MODE_RGB_S = 2,
- MODE_BGR_S = 3,
-};
-
enum exynos_cpu_auto_cmd_rate {
DISABLE_AUTO_FRM,
PER_TWO_FRM,
diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c
index 6416b90..f07568a 100644
--- a/drivers/video/exynos_fimd.c
+++ b/drivers/video/exynos_fimd.c
@@ -273,7 +273,7 @@ void exynos_fimd_lcd_init(vidinfo_t *vid)
/* store panel info to global variable */
pvid = vid;
- rgb_mode = MODE_RGB_P;
+ rgb_mode = vid->rgb_mode;
if (vid->interface_mode == FIMD_RGB_INTERFACE) {
cfg |= EXYNOS_VIDCON0_VIDOUT_RGB;
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 5f913ca..e611ace 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -216,9 +216,12 @@
/* LCD */
#define CONFIG_EXYNOS_FB
#define CONFIG_LCD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_32BPP
#define CONFIG_FB_ADDR 0x52504000
#define CONFIG_S6E8AX0
#define CONFIG_EXYNOS_MIPI_DSIM
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1280 * 720 * 4)
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 120 * 4) + (1 << 12))
#endif /* __CONFIG_H */
diff --git a/include/lcd.h b/include/lcd.h
index 3d9ef16..5d09696 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -235,6 +235,10 @@ typedef struct vidinfo {
unsigned int wr_setup;
unsigned int wr_act;
unsigned int wr_hold;
+ unsigned int boot_logo_on;
+ unsigned int rgb_mode;
+ unsigned int logo_width;
+ unsigned int logo_height;
/* parent clock name(MPLL, EPLL or VPLL) */
unsigned int pclk_name;
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
