On 18/04/2012 13:05, Timo Ketola wrote: >> >> fsl_esdhc.c includes config.h. If your board configuration file includes >> imx-regs.h, as most i.MX boards do, the file is automatically included, >> I suppose. > > I tried that but then: > > .../u-boot-imx/build-exe4026/include/asm/arch/imx-regs.h:43:2: error: > expected specifier-qualifier-list before ‘u32’ > > when compiling > > arch/arm/cpu/arm926ejs/cpu.o
Well, I have not said that there cannot be other issues. At first glance you must include asm/types.h, in cpu.c or in imx-regs.h. >>> PPC seems to use a predefined macro from asm/immap_8xxx.h files. Where >>> is that file included? >> >> It is a different way. The board configuration file includes the >> register description file, so for example immap_86xx.h, immap_85xx.h, > > Where? I don't see an example. For PPC86xx I can see at least: arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c:#include <asm/immap_86xx.h> arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c:#include <asm/immap_86xx.h> board/freescale/mpc8610hpcd/mpc8610hpcd.c:#include <asm/immap_86xx.h> board/freescale/mpc8641hpcn/mpc8641hpcn.c:#include <asm/immap_86xx.h> > But I see them included in common.h. > Should there be also imx-regs? Seems to work if I do so. No, this is wrong. > >> or >> imx-regs.h, and defines CONFIG_SYS_FSL_ESDHC_ADDR using its own specific >> macro, if any, for example: >> >> #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR >> >> Why is it not enough for you to set in your board configuration file: >> >> #define CONFIG_SYS_FSL_ESDHC_ADDR IMX_MMC_SDHC1_BASE > > I tried also exactly that, but then: > > fsl_esdhc.c:544:20: error: ‘IMX_MMC_SDHC1_BASE’ undeclared (first use in > this function) ...then imx-regs.h was not included... > > fsl_esdhc.c seems not to see imx-regs.h file. > > Then I tried to include imx-regs.h in fsl_esdhc.c and 'MAKEALL -a arm' > was happy. > > Maybe the right fix is to include imx-regs in common.h? No. common.h, as the name suggests, is for all architectures, not only for i.MX. We cannot fix i:MX and break other boards. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
