On 18/04/2012 09:57, Timo Ketola wrote: > One might want to define CONFIG_SYS_FSL_ESDHC_ADDR with the macro already > define in imx-regs.h, e.g. with IMX_MMC_SDHC1_BASE. Then the header must be > included here. > > Signed-off-by: Timo Ketola <t...@exertus.fi> > --- > drivers/mmc/fsl_esdhc.c | 1 + > 1 files changed, 1 insertions(+), 0 deletions(-) > > diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c > index a2f35e3..5ada747 100644 > --- a/drivers/mmc/fsl_esdhc.c > +++ b/drivers/mmc/fsl_esdhc.c > @@ -36,6 +36,7 @@ > #include <fsl_esdhc.h> > #include <fdt_support.h> > #include <asm/io.h> > +#include <asm/arch/imx-regs.h> >
NAK. There is a good reason to avoid it. The fsl_esdhc driver is common to both i.MX and PowerPc architecture, and of course PowerPC have not imx-regs.h. And CONFIG_SYS_FSL_ESDHC_ADDR cannot be set by a macro in imx-regs.h, because it is different on PowerPC. By the way, why do you need it if you do not use that macro ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
