If one PAD does not have mux or pad config register, we need
set the NO_MUX_I/NO_PAD_I to 0, the old value is not correct
Signed-off-by: Jason Liu <jason....@linaro.org>
CC: Stefano Babic <sba...@denx.de>
---
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
index afaa068..9979651 100644
--- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
@@ -48,8 +48,8 @@
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
-#define NO_MUX_I 0x3FF
-#define NO_PAD_I 0x7FF
+#define NO_MUX_I 0
+#define NO_PAD_I 0
enum {
MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0,
0x0000, 0, 0),
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
