> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot- > boun...@lists.denx.de] On Behalf Of David Purdy > Sent: 02 April 2012 02:54 > To: u-boot@lists.denx.de > Subject: [U-Boot] Problem w/ SATA/IDE on Kirkwood _88F6281_ board: > > Problem w/ SATA/IDE on Kirkwood 88F6281 board: > > I've got U-Boot 2011.12 working well on a 8192 Kirkwood board, > _except_ for > a nagging SATA problem. > Currently, it loads and executes U-Boot fine, it boots fine from a USB > drive, but I'm unable to get the SATA port to function correctly. Any > insight from Albert, Prafulla or anyone else who recognizes this > problem, > would be greatly appreciated.
I remember there was some delay issue on SATA, since processor in this platform is running at lower clock, (may be) this could be one of parameter to be considered. May be Albert can have some more inside on this. Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
