> -----Original Message----- > From: Michael Walle [mailto:mich...@walle.cc] > Sent: 29 March 2012 20:09 > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de > Subject: Re: [PATCH v2] lsxl: add support for lschlv2 and lsxhl > > Am Donnerstag 29 März 2012, 16:24:23 schrieb Prafulla Wadaskar: > > > -----Original Message----- > > > From: Michael Walle [mailto:mich...@walle.cc] > > > Sent: 29 March 2012 18:08 > > > To: Prafulla Wadaskar > > > Cc: u-boot@lists.denx.de > > > Subject: Re: [PATCH v2] lsxl: add support for lschlv2 and lsxhl > > > > > > Am Dienstag 27 März 2012, 09:27:49 schrieb Prafulla Wadaskar: > > > > > # diff --git a/board/buffalo/lsxl/config.mk > > > > > b/board/buffalo/lsxl/config.mk new file mode 100644 > > > > > index 0000000..062554b > > > > > --- /dev/null > > > > > +++ b/board/buffalo/lsxl/config.mk > > > > > @@ -0,0 +1 @@ > > > > > +ALL-y += $(obj)u-boot.kwb > > > > > > > > Pls remove this file > > > > > > Is there another way to build the u-boot.kwb binary by default? > > > > > > The main Makefile states: > > > # Always append ALL so that arch config.mk's can add custom ones > > > > > > and theres a rule for $(obj)u-boot.kwb. > > > > Just pass u-boot.kwm to the make, will do the needful, if this > satisfies > > the goal of generating u-boot.kwb, then why to add one file to the > source > > code? > - this won't work easily for out-of-tree builds, will it? because you > have to > pass $(obj)u-boot.kwb to make and $(obj) is $O which is specified by > the user, > so he has to specify it twice
Dear Michael, AFAIK, you need to pass only "u-boot.kwb" to the make (no $(okj) needed) > - i'm only interested in the u-boot.kwb, why shouldn't it be > generated by > default? > - i can't build it with a sinlge make call. Eg. atm i'm doing > make -j3 -C ../u-boot O=`pwd` CROSS_COMPILE=arm-linux-gnueabi- > lschlv2 > otherwise i have to do > make -j3 -C ../u-boot O=`pwd` CROSS_COMPILE=arm-linux-gnueabi- > lschlv2 > make -j3 -C ../u-boot O=`pwd` CROSS_COMPILE=arm-linux-gnueabi- \ > `pwd`/u-boot.kwb "make u-boot.kwb CROSS_COMPILE=arm-linux-gnueabi-" generates u-boot.kwb, this should be valid with other use case too. if not, it makes sense to add an additional line in script that a file in code :-) Regards.. Prafulla . .. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
