Hi Marek,
I adapted my patch for git://git.denx.de/u-boot-usb.git master branch.
As the build for target "Seaboard" is broken once I enable USB in
Seaboard.h,
I am unable to test my changes on "u-boot-usb".
I would have to merge lots of changes from "denx-uboot-tegra" to make it
working for "u-boot-usb.git" master branch.
I can send the adapted patch if it's needed.
Thanks,
Puneet
On Friday 16 March 2012 02:22 PM, Marek Vasut wrote:
Dear Puneet Saxena,
I hope you found the rebased patch I attached useful.
Hi Marek,
I need to remove the changes in ehci_hcd.c as per Mike's comment and
adapt my patch for git://git.denx.de/u-boot-usb.git master branch.
So will be sending next patch with the above changes, shortly.
Let me rebase u-boot-usb.git on top of mainline u-boot for you (done) :)
With this resultant patch we see warnings for few start address
warnings(related to ehci_hcd.c) and stop address warnings.
This is ok, let's work on it slowly and do it properly :) I'll be happy to
assist you by testing etc.
Warnings due to ehci_hcd.c, can be avoided by giving delay of 1ms in
after handshake(), but this is a HACK and a proper solution.
Working on the root cause.
I see ... thanks for your efforts!
Thanks& Regards,
Puneet
Thank you!
Best regards,
Marek Vasut
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may
contain
confidential information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
