Am 16/03/2012 22:01, schrieb Fabio Estevam: > On Fri, Mar 16, 2012 at 5:21 PM, Fabio Estevam <feste...@gmail.com> wrote: > >> I would be glad to receive some suggestion in order to get the 1GHz frequency >> printed during the initial boot log. > > If I print the frequency inside board_late_init() then I see the > correct reported CPU frequency: > > U-Boot 2011.12-07170-g536d7cc-dirty (Mar 16 2012 - 17:53:26) > > Board: MX53 LOCO > I2C: ready > DRAM: 1 GiB > WARNING: Caches not enabled > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > In: serial > Out: serial > Err: serial > CPU: Freescale i.MX53 family rev2.1 at 1000 MHz > Reset cause: POR > Net: FEC > Warning: failed to set MAC address > > Hit any key to stop autoboot: 0 > MX53LOCO U-Boot > > > And the patch now looks like: >
I do not see pmic_dialog.c and where the constants for dialog are definded. Have I missed another patch ? Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot