> -----Original Message----- > From: Ajay Bhargav [mailto:ajay.bhar...@einfochips.com] > Sent: 13 February 2012 18:58 > To: li...@bohmer.net > Cc: Prafulla Wadaskar; marek.va...@gmail.com; u-boot@lists.denx.de; > Ajay Bhargav > Subject: [v3 3/3] Armada100: gplugD: Add USB command support > > This patch adds support for USB commands and USB storage device for > Marvell gplugD > > Signed-off-by: Ajay Bhargav <ajay.bhar...@einfochips.com> > --- > Changes for v2: > - removed unwanted ifdef > - fat and ext2 command support moved to new patch > Changes for v3: > - Not changed > > include/configs/gplugd.h | 12 ++++++++++++ > 1 files changed, 12 insertions(+), 0 deletions(-) > > diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h > index 9813309..061ebe6 100644 > --- a/include/configs/gplugd.h > +++ b/include/configs/gplugd.h > @@ -72,6 +72,7 @@ > #define CONFIG_CMD_I2C > #define CONFIG_CMD_AUTOSCRIPT > #undef CONFIG_CMD_FPGA > +#define CONFIG_CMD_USB > > /* Disable DCACHE */ > #define CONFIG_SYS_DCACHE_OFF > @@ -134,4 +135,15 @@ > #define CONFIG_CMD_EDITENV > #define CONFIG_CMD_SAVEENV > > +#ifdef CONFIG_CMD_USB > +#define CONFIG_USB_EHCI > +#define CONFIG_USB_EHCI_ARMADA100 > +#define CONFIG_EHCI_IS_TDI > +#define CONFIG_USB_STORAGE > +#endif /* CONFIG_CMD_USB */ > + > +#define CONFIG_DOS_PARTITION > +#define CONFIG_ISO_PARTITION > +#define CONFIG_SUPPORT_VFAT > + > #endif /* __CONFIG_GPLUGD_H */ > -- > 1.7.7.2
Applied to u-boot-marvell.git next branch Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
