This patch adds support for USB commands and USB storage device for
Marvell gplugD
Signed-off-by: Ajay Bhargav <ajay.bhar...@einfochips.com>
---
Changes for v2:
- removed unwanted ifdef
- fat and ext2 command support moved to new patch
Changes for v3:
- Not changed
include/configs/gplugd.h | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index 9813309..061ebe6 100644
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -72,6 +72,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
+#define CONFIG_CMD_USB
/* Disable DCACHE */
#define CONFIG_SYS_DCACHE_OFF
@@ -134,4 +135,15 @@
#define CONFIG_CMD_EDITENV
#define CONFIG_CMD_SAVEENV
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ARMADA100
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif /* CONFIG_CMD_USB */
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
#endif /* __CONFIG_GPLUGD_H */
--
1.7.7.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
