> No need to define CONFIG_ARCH_CPU_INIT.
>
> All mx6 based boards should use arch_cpu_init().
>
Acked-by: Marek Vasut <ma...@denx.de>
> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
> ---
> arch/arm/cpu/armv7/mx6/soc.c | 2 --
> include/configs/mx6qarm2.h | 1 -
> include/configs/mx6qsabrelite.h | 1 -
> 3 files changed, 0 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index 2ac74b5..2d07099 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -37,7 +37,6 @@ u32 get_cpu_rev(void)
> return system_rev;
> }
>
> -#ifdef CONFIG_ARCH_CPU_INIT
> void init_aips(void)
> {
> struct aipstz_regs *aips1, *aips2;
> @@ -77,7 +76,6 @@ int arch_cpu_init(void)
>
> return 0;
> }
> -#endif
>
> #if defined(CONFIG_FEC_MXC)
> void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
> diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
> index 0962d3c..87ff0a3 100644
> --- a/include/configs/mx6qarm2.h
> +++ b/include/configs/mx6qarm2.h
> @@ -37,7 +37,6 @@
> /* Size of malloc() pool */
> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 *
1024)
>
> -#define CONFIG_ARCH_CPU_INIT
> #define CONFIG_BOARD_EARLY_INIT_F
> #define CONFIG_MXC_GPIO
>
> diff --git a/include/configs/mx6qsabrelite.h
> b/include/configs/mx6qsabrelite.h index 93000f0..85e6570 100644
> --- a/include/configs/mx6qsabrelite.h
> +++ b/include/configs/mx6qsabrelite.h
> @@ -37,7 +37,6 @@
> /* Size of malloc() pool */
> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
>
> -#define CONFIG_ARCH_CPU_INIT
> #define CONFIG_BOARD_EARLY_INIT_F
> #define CONFIG_MXC_GPIO
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
