No need to define CONFIG_ARCH_CPU_INIT.
All mx6 based boards should use arch_cpu_init().
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
arch/arm/cpu/armv7/mx6/soc.c | 2 --
include/configs/mx6qarm2.h | 1 -
include/configs/mx6qsabrelite.h | 1 -
3 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 2ac74b5..2d07099 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -37,7 +37,6 @@ u32 get_cpu_rev(void)
return system_rev;
}
-#ifdef CONFIG_ARCH_CPU_INIT
void init_aips(void)
{
struct aipstz_regs *aips1, *aips2;
@@ -77,7 +76,6 @@ int arch_cpu_init(void)
return 0;
}
-#endif
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 0962d3c..87ff0a3 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -37,7 +37,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 93000f0..85e6570 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -37,7 +37,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
