Add U-Boot's peripheral clock information to the Tegra20 device tree file.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Adjust definitions to fit new peripheral clock bindings
- Change 'speed' to 'clock-frequency'
- Remove u-boot,pinmux binding (sadly)
Changes in v3:
- Move speed setting from tegra20.dtsi to board .dts file
Changes in v4:
- Update to use new tegra2 clock and reset binding
arch/arm/dts/tegra20.dtsi | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index d6bc9f1..b6f37c2 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -34,6 +34,7 @@
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C000 0x100>;
interrupts = < 70 >;
+ clocks = <&tegra_car 12>; /* PERIPH_ID_I2C1 */
};
i2c@7000c400 {
@@ -42,6 +43,7 @@
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C400 0x100>;
interrupts = < 116 >;
+ clocks = <&tegra_car 54>; /* PERIPH_ID_I2C2 */
};
i2c@7000c500 {
@@ -50,14 +52,16 @@
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C500 0x100>;
interrupts = < 124 >;
+ clocks = <&tegra_car 67>; /* PERIPH_ID_I2C3 */
};
i2c@7000d000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "nvidia,tegra20-i2c";
+ compatible = "nvidia,tegra20-i2c-dvc";
reg = <0x7000D000 0x200>;
interrupts = < 85 >;
+ clocks = <&tegra_car 47>; /* PERIPH_ID_DVC_I2C */
};
i2s@70002800 {
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
