Hi Albert, Albert ARIBAUD wrote: > Hi Daniel, > > Le 25/01/2012 14:19, Daniel Gorsulowski a écrit : >> Signed-off-by: Daniel Gorsulowski<daniel.gorsulow...@esd.eu> >> --- >> board/esd/meesc/meesc.c | 8 ++++---- >> 1 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c >> index 4882ffc..9dd4375 100644 >> --- a/board/esd/meesc/meesc.c >> +++ b/board/esd/meesc/meesc.c >> @@ -73,20 +73,20 @@ static void meesc_nand_hw_init(void) >> writel(csa,&matrix->csa[0]); >> >> /* Configure SMC CS3 for NAND/SmartMedia */ >> - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | >> - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), >> + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | >> + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2), >> &smc->cs[3].setup); >> >> writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | >> AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), >> &smc->cs[3].pulse); >> >> - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), >> + writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6), >> &smc->cs[3].cycle); >> writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | >> AT91_SMC_MODE_EXNW_DISABLE | >> AT91_SMC_MODE_DBW_8 | >> - AT91_SMC_MODE_TDF_CYCLE(3), >> + AT91_SMC_MODE_TDF_CYCLE(12), >> &smc->cs[3].mode); >> >> /* Configure RDY/BSY */ > > Is this (and its counterpart for otc570) a performance improvement or a > bug fix?.
There were problems with a new batch of NAND flashes in our production process. We figured out, that the NAND timing is too fast. So I would call this a bug fix. > > Amicalement, > -- > Albert. Kind regards, Daniel Gorsulowski _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
