Hi Albert,
please pull from u-boot-imx.
The following changes since commit 9a3aae22edf1eda6326cc51c28631ca5c23b7706:
arm, davinci: Add support for the Calimain board from OMICRON
electronics (2012-02-12 10:11:33 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Eric Nelson (6):
mx6q: define GPIO macros for translating between ordinals and
port:index
mxc_spi: move machine specifics into CPU headers
mx6q: Add support for ECSPI through mxc_spi driver
mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
mx6q: mx6qsabrelite: Conditionally define macros for environment
in serial flash
Fabio Estevam (7):
mx53loco: Use gpio_direction_input prior to gpio_get_value
mx53ard: Use gpio_direction_input prior to gpio_get_value
mx53evk: Use gpio_direction_input prior to gpio_get_value
mx53smd: Use gpio_direction_input prior to gpio_get_value
mx51evk: Use gpio_direction_input prior to gpio_get_value
mx35: generic: Let get_reset_cause be defined only when
CONFIG_DISPLAY_CPUINFO is selected
mx35pdk: Remove duplicate CPU revision and reset cause information
Marek Vasut (2):
i.MX28: Fix VDDIO and VDDA setup
MX28: Fix get_timer() / get_tbclk() issue
Matthias Fuchs (4):
mx28evk: add RTC support
mx28evk: add USB support
mx28evk: add SPI support
mx28: fix SPL code to make USB booting work
Shawn Guo (1):
common/image.c: align usage of fdt_high with initrd_high
Stefano Babic (4):
MX35: add missing get_ticks() and get_tbclk()
MX31: add missing get_tbclk()
MX5/MX6: add missing get_ticks() and get_tbclk()
MX27: add missing get_tbclk()
README | 8 ++
arch/arm/cpu/arm1136/mx31/timer.c | 9 ++
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
arch/arm/cpu/arm1136/mx35/timer.c | 103
+++++++++++++++---------
arch/arm/cpu/arm926ejs/mx27/timer.c | 5 +
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +++-
arch/arm/cpu/arm926ejs/mx28/start.S | 21 +++++-
arch/arm/cpu/arm926ejs/mx28/timer.c | 19 ++++-
arch/arm/cpu/armv7/imx-common/timer.c | 75 ++++++++++++++-----
arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +++++++
arch/arm/include/asm/arch-mx35/imx-regs.h | 25 ++++++
arch/arm/include/asm/arch-mx5/imx-regs.h | 30 +++++++
arch/arm/include/asm/arch-mx6/imx-regs.h | 48 ++++++++++++
board/freescale/mx28evk/iomux.c | 8 ++
board/freescale/mx28evk/mx28evk.c | 7 ++
board/freescale/mx35pdk/mx35pdk.c | 27 +------
board/freescale/mx51evk/mx51evk.c | 2 +
board/freescale/mx53ard/mx53ard.c | 2 +
board/freescale/mx53evk/mx53evk.c | 2 +
board/freescale/mx53loco/mx53loco.c | 2 +
board/freescale/mx53smd/mx53smd.c | 1 +
board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 ++++++
common/image.c | 12 +--
drivers/spi/mxc_spi.c | 93
++---------------------
include/configs/mx28evk.h | 64 +++++++++++++++-
include/configs/mx6qsabrelite.h | 29 ++++++-
27 files changed, 472 insertions(+), 192 deletions(-)
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
