> hi Albert, > > On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD > > <albert.u.b...@aribaud.net>wrote: > > Hi all, > > > > I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which > > I just sent a pull request. > > > > The raw result is: > > > > --------------------- SUMMARY ---------------------------- > > Boards compiled: 283 > > Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16 > > actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270 > > dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart > > highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet > > km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un > > mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk > > mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand > > omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2 > > qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128 > > vpac270_nor_256 vpac270_ond_256 ) > > ------------------------------**---------------------------- > > <snip> > > > The rest: > > > > cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood > > km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot > > omap1610inn_cs_autoboot portl2 twister > > > > Fail with various causes; I'll send out individual status mails (CC: > > interested parties) later today. > > I pulled in a new u-boot-arm tree, and am able to compile both hawkboard > and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21 > binutils. Can you please send me a log of the errors you get for the > hawkboard. Thanks.
Can you please try with ELDK 5.1 and ELDK 4.2 ? These are toolchains that the u- boot has to be compilable with without errors. If it isn't, there's a problem in the code. M > > -sughosh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot