Hi Dirk,
On 02/09/2012 08:18 AM, Dirk Behme wrote:
> Hi Wolfgang,
>
> On 08.02.2012 16:23, Wolfgang Grandegger wrote:
>> Cc: Stefano Babic <sba...@denx.de>
>> Cc: Jason Liu <jason....@linaro.org>
>> Signed-off-by: Wolfgang Grandegger <w...@denx.de>
>> ---
>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 12 ++++++++++++
>> include/configs/mx6qsabrelite.h | 15 +++++++++++++++
>> 2 files changed, 27 insertions(+), 0 deletions(-)
>>
>> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> index 4028789..01ecec4 100644
>> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> @@ -77,6 +77,18 @@ static void setup_iomux_uart(void)
>> imx_iomux_v3_setup_multiple_pads(uart2_pads,
>> ARRAY_SIZE(uart2_pads));
>> }
>>
>> +#ifdef CONFIG_USB_EHCI_MX6
>> +int board_ehci_hcd_init(int port)
>> +{
>> + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
>
> Where is the definition of 'usb_pads'?
Oops, that hunk gets lost when rebasing to head of u-boot-imx in a hurry:
@@ -122,6 +122,10 @@ iomux_v3_cfg_t enet_pads2[] = {
MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
+iomux_v3_cfg_t usb_pads[] = {
+ MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
static void setup_iomux_enet(void)
{
gpio_direction_output(87, 0); /* GPIO 3-23 */
Will be fixed in v2.
>
> mx6qsabrelite.c: error: 'usb_pads' undeclared (first use in this function)
>
>> + /* Reset USB hub */
>> + gpio_direction_output(204, 0); /* GPIO 7-12 */
>
> With
>
> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=7861b0f3eb638df23b992f89229c3b416634b6fa
>
>
> we might want to use something like
>
> gpio_direction_output(GPIO_NUMBER(7, 12), 0);
OK, unfortunately, that file is full of such calls using the
number directly ==> seperate patch.
> ?
>
> Same below for gpio_set_value() ?
>
>> + mdelay(2);
>> + gpio_set_value(204, 1);
>> +}
>
> mx6qsabrelite.c: warning: no return statement in function returning
> non-void
Puh, v1 is obviously crap... will send v2 in a second, sorry.
Wolfgang.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
