Hi Wolfgang, On 08.02.2012 16:23, Wolfgang Grandegger wrote:
Cc: Stefano Babic <sba...@denx.de> Cc: Jason Liu <jason....@linaro.org> Signed-off-by: Wolfgang Grandegger <w...@denx.de> --- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 12 ++++++++++++ include/configs/mx6qsabrelite.h | 15 +++++++++++++++ 2 files changed, 27 insertions(+), 0 deletions(-)diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 4028789..01ecec4 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -77,6 +77,18 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); }+#ifdef CONFIG_USB_EHCI_MX6+int board_ehci_hcd_init(int port) +{ + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
Where is the definition of 'usb_pads'? mx6qsabrelite.c: error: 'usb_pads' undeclared (first use in this function)
+ /* Reset USB hub */ + gpio_direction_output(204, 0); /* GPIO 7-12 */
With http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=7861b0f3eb638df23b992f89229c3b416634b6fa we might want to use something like gpio_direction_output(GPIO_NUMBER(7, 12), 0); ? Same below for gpio_set_value() ?
+ mdelay(2); + gpio_set_value(204, 1); +}
mx6qsabrelite.c: warning: no return statement in function returning non-void Best regards Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
