On 31/01/2012 18:52, Eric Nelson wrote: > The default settings store the persistent environment on SD card > and not serial flash (SPI NOR). > > To use SPI NOR to save the environment instead of SD card, edit > include/configs/mx6qsabrelite.h and > > - undefine CONFIG_ENV_IS_IN_MMC > - define CONFIG_ENV_IS_IN_SPI_FLASH > > The SPI driver can take as chip select the controller's chip selects > as well as an external GPIO. The LSB byte has the value of the internal > chip select, the highest (thought as 16-bit value) contains the GPIO > number. > > The GPIO used on Sabre Lite is GP3:19 == 83. > > Signed-off-by: Eric Nelson <eric.nel...@boundarydevices.com> > > ---
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
