From: Robert Delien <rob...@delien.nl>
Signed-off-by: Robert Delien <rob...@delien.nl>
---
board/freescale/mx28evk/iomux.c | 14 ++++++--------
1 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c
index d724d2f..178bde2 100644
--- a/board/freescale/mx28evk/iomux.c
+++ b/board/freescale/mx28evk/iomux.c
@@ -35,7 +35,7 @@ const iomux_cfg_t iomux_setup[] = {
MX28_PAD_PWM0__DUART_RX | MXS_PAD_3V3,
MX28_PAD_PWM1__DUART_TX | MXS_PAD_3V3,
- /* MMC0 */
+ /* Right-hand side MMC slot (MMC0) */
MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
@@ -45,15 +45,13 @@ const iomux_cfg_t iomux_setup[] = {
MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX28_PAD_SSP1_SCK__GPIO_2_12,
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_SCK__SSP0_SCK | MUX_CONFIG_SSP0,
+ /* MMC0 Write-protect */
+ MX28_PAD_SSP1_SCK__GPIO_2_12 | MXS_PAD_3V3 | MXS_PAD_PULLUP,
/* MMC0 slot power enable */
MX28_PAD_PWM3__GPIO_3_28 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
/* FEC0 */
MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
