Add support for fixing usb mode and phy type for
MPH(Multi Port Host) USB controllers in device-tree nodes.
Required for socs like P3060, P5020, etc having MPH USB controller.
Signed-off-by: Ramneek Mehresh <ramneek.mehr...@freescale.com>
---
arch/powerpc/cpu/mpc8xxx/fdt.c | 46 ++++++++++++++++++++++++++--------------
include/fdt_support.h | 4 +-
2 files changed, 32 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index d07ae1b..b22e0ec 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
*
* This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
* arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
@@ -86,30 +86,38 @@ void ft_fixup_num_cores(void *blob) {
}
#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
-#ifdef CONFIG_HAS_FSL_DR_USB
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
const char *phy_type, int start_offset)
{
- const char *compat = "fsl-usb2-dr";
+ const char *compat[] = {"fsl-usb2-mph", "fsl-usb2-dr"};
const char *prop_mode = "dr_mode";
const char *prop_type = "phy_type";
+ char *node_type = NULL;
int node_offset;
int err;
node_offset = fdt_node_offset_by_compatible(blob,
- start_offset, compat);
+ start_offset, compat[0]);
if (node_offset < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- compat, fdt_strerror(node_offset));
- return -1;
- }
+ node_offset = fdt_node_offset_by_compatible(blob,
+ start_offset, compat[1]);
+ if (node_offset < 0) {
+ printf("WARNING: could not find compatible"
+ " node %s or %s: %s.\n", compat[0],
+ compat[1], fdt_strerror(node_offset));
+ return -1;
+ } else
+ node_type = (char *)compat[1];
+ } else
+ node_type = (char *)compat[0];
if (mode) {
err = fdt_setprop(blob, node_offset, prop_mode, mode,
strlen(mode) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
- prop_mode, compat, fdt_strerror(err));
+ prop_mode, node_type, fdt_strerror(err));
}
if (phy_type) {
@@ -117,7 +125,7 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const
char *mode,
strlen(phy_type) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
- prop_type, compat, fdt_strerror(err));
+ prop_type, node_type, fdt_strerror(err));
}
return node_offset;
@@ -137,28 +145,34 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
for (i = 1; i <= FSL_MAX_NUM_USB_CTRLS; i++) {
int mode_idx = -1, phy_idx = -1;
- sprintf(str, "%s%d", "usb", i);
+ snprintf(str, 5, "%s%d", "usb", i);
if (hwconfig(str)) {
- for (j = 0; j < sizeof(modes); j++) {
+ for (j = 0; j < sizeof(modes)/sizeof(char *); j++) {
if (hwconfig_subarg_cmp(str, "dr_mode",
modes[j])) {
mode_idx = j;
break;
}
}
- for (j = 0; j < sizeof(phys); j++) {
+ for (j = 0; j < sizeof(phys)/sizeof(char *); j++) {
if (hwconfig_subarg_cmp(str, "phy_type",
phys[j])) {
phy_idx = j;
break;
}
}
- if (mode_idx >= 0)
+ if (mode_idx >= 0) {
usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
modes[mode_idx], NULL, usb_mode_off);
- if (phy_idx >= 0)
+ if (usb_mode_off < 0)
+ return;
+ }
+ if (phy_idx >= 0) {
usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
NULL, phys[phy_idx], usb_phy_off);
+ if (usb_phy_off < 0)
+ return;
+ }
if (!strcmp(str, "usb1"))
usb1_defined = 1;
if (mode_idx < 0 && phy_idx < 0)
@@ -174,7 +188,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off);
}
}
-#endif /* CONFIG_HAS_FSL_DR_USB */
+#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
/*
* update crypto node properties to a specified revision of the SEC
diff --git a/include/fdt_support.h b/include/fdt_support.h
index cef3c65..4b9f84a 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -61,11 +61,11 @@ int fdt_find_and_setprop(void *fdt, const char *node, const
char *prop,
const void *val, int len, int create);
void fdt_fixup_qe_firmware(void *fdt);
-#ifdef CONFIG_HAS_FSL_DR_USB
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
void fdt_fixup_dr_usb(void *blob, bd_t *bd);
#else
static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
-#endif /* CONFIG_HAS_FSL_DR_USB */
+#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
#if defined(CONFIG_SYS_FSL_SEC_COMPAT)
void fdt_fixup_crypto_node(void *blob, int sec_rev);
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
