Dear Albert ARIBAUD,
In message <4f13dcef.1070...@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit f1f441afc41083e54775e6efe21b2c059e80b8f7:
>
> openrisc: Add MAINTAINERS entry (2012-01-13 21:17:08 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Andreas M�ller (7):
> drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
> board/overo/overo.c: replace printf with one argument by puts
> include/configs/omap3_overo.h: several cleanups
> drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
> OMAP SPL: call timer_init in s_init to make udelay work earlier
> omap_rev_string: output to stdout
> overo: add SPL support
>
> Aneesh V (1):
> omap4: fix boot issue on ES2.0 Panda
>
> Chandan Nath (5):
> ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX
> ARM:AM33XX: Fix ddr and timer register offset
> ARM:AM33XX: Fixing AM335X config parameters
> ARM:AM33XX: Add mmc/sd support
> ARM:AM33XX: Add SPL support for AM335X EVM
>
> Christian Riesch (3):
> arm, davinci: Use a common configuration file for da850evm and
> da850_am18xxevm
> da850evm: Remove CONFIG_SYS_xxCACHE_OFF defines
> arm, davinci: Change byte order of RTC kick register values
>
> Eric Nelson (1):
> i.mx6q: mx6qarm2: Enable the usboh3 clock
>
> Fabio Estevam (7):
> net: imx: Add multi-FEC support for imx_get_mac_from_fuse
> mx28: Let imx_get_mac_from_fuse be common for mx28
> mx28: Let dram_init be common for mx28
> mx28evk: Add initial support for MX28EVK board
> mx28evk: Remove 'all' target from Makefile
> m28evk: Use GENERATED_GBL_DATA_SIZE
> m28evk: Remove 'all' target from Makefile
>
> Jason Liu (6):
> i.mx: i.mx6q: Add the enet clock function
> fec: add the i.mx6q enet driver support
> i.mx6q: arm2: Add the enet function support
> i.mx6:imx6q: allign MAC address with burned-in ordering
> imx: mx6q: add aipstz init for off platform periph
> i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
>
> Marek Vasut (2):
> MX28: Fix MXSBOOT segfault if no params specified
> M28EVK: Fix build if CONFIG_CMD_NAND not selected
>
> Nikita Kiryanov (6):
> cm-t35: cleanup the config file
> cm-t35: various cleanups
> cm-t35: add EEPROM module and pass Linux a serial number
> omap3: make get_board_rev() function weak
> cm-t35: pass correct revision information to Linux
> cm-t35: use the new EEPROM module to read the MAC address
>
> Peter Barada (1):
> ARMV7: Add support For Logic OMAP35x/DM37x modules
>
> Peter Meerwald (1):
> beagle: add eeprom expansion board info for bct brettl3
>
> Thomas Weber (1):
> OMAP3: Remove unused define CONFIG_OMAP3_*_DDR
>
> Veli-Pekka Peltola (1):
> mx28: remove omap specific config options
>
> Zach Sadecki (1):
> mx28: fix clearing of IRQs in power init
>
> MAINTAINERS | 6 +
> Makefile | 2 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 67 ++++
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
> arch/arm/cpu/arm926ejs/mx28/start.S | 6 -
> arch/arm/cpu/armv7/am33xx/Makefile | 2 -
> arch/arm/cpu/armv7/am33xx/board.c | 66 ++++-
> arch/arm/cpu/armv7/am33xx/clock.c | 8 +
> arch/arm/cpu/armv7/am33xx/config.mk | 18 +
> arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
> arch/arm/cpu/armv7/am33xx/lowlevel_init.S | 72 ----
> arch/arm/cpu/armv7/mx6/clock.c | 5 +
> arch/arm/cpu/armv7/mx6/soc.c | 45 ++-
> arch/arm/cpu/armv7/omap-common/Makefile | 4 +
> arch/arm/cpu/armv7/omap-common/boot-common.c | 49 +++
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 38 +--
> arch/arm/cpu/armv7/omap-common/spl.c | 14 +-
> arch/arm/cpu/armv7/omap3/board.c | 2 +
> arch/arm/cpu/armv7/omap3/sys_info.c | 3 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 4 +-
> .../arm/include/asm/arch-am33xx}/common_def.h | 4 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 44 ++--
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 6 +-
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 164 +++++++++
> arch/arm/include/asm/arch-am33xx/omap.h | 59 ++++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
> arch/arm/include/asm/arch-davinci/hardware.h | 4 +-
> arch/arm/include/asm/arch-mx28/sys_proto.h | 2 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 15 +-
> arch/arm/include/asm/arch-omap3/mem.h | 26 ++
> arch/arm/include/asm/arch-omap4/omap.h | 2 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +-
> arch/arm/include/asm/omap_common.h | 7 +-
> board/cm_t35/Makefile | 4 +-
> board/cm_t35/cm_t35.c | 27 +-
> board/cm_t35/eeprom.c | 124 +++++++
> board/cm_t35/eeprom.h | 33 ++
> board/denx/m28evk/Makefile | 2 -
> board/denx/m28evk/m28evk.c | 53 +---
> board/enbw/enbw_cmc/enbw_cmc.c | 4 +-
> board/freescale/mx28evk/Makefile | 47 +++
> board/freescale/mx28evk/iomux.c | 138 ++++++++
> board/freescale/mx28evk/mx28evk.c | 169 +++++++++
> board/freescale/mx28evk/u-boot.bd | 14 +
> board/freescale/mx6qarm2/imximage.cfg | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 90 +++++
> board/freescale/mx6qsabrelite/Makefile | 42 +++
> board/freescale/mx6qsabrelite/imximage.cfg | 170 +++++++++
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 151 ++++++++
> .../{overo/config.mk => logicpd/omap3som/Makefile} | 28 ++-
> board/logicpd/omap3som/omap3logic.c | 247 +++++++++++++
> board/logicpd/omap3som/omap3logic.h | 47 +++
> board/overo/overo.c | 79 ++++-
> board/overo/overo.h | 5 +
> board/ti/am335x/evm.c | 2 +-
> board/ti/am335x/mux.c | 23 ++-
> board/ti/beagle/beagle.c | 4 +
> boards.cfg | 5 +-
> doc/README.mx6qsabrelite | 67 ++++
> drivers/i2c/omap24xx_i2c.c | 25 +-
> drivers/net/fec_mxc.c | 19 +-
> drivers/net/fec_mxc.h | 9 +-
> include/configs/am335x_evm.h | 62 +++-
> include/configs/cm_t35.h | 82 +++---
> include/configs/da850_am18xxevm.h | 246 -------------
> include/configs/da850evm.h | 3 -
> include/configs/dig297.h | 3 -
> include/configs/igep0020.h | 3 -
> include/configs/igep0030.h | 3 -
> include/configs/m28evk.h | 13 +-
> include/configs/mx28evk.h | 176 ++++++++++
> include/configs/mx6qarm2.h | 12 +-
> include/configs/mx6qsabrelite.h | 162 +++++++++
> include/configs/omap3_logic.h | 362
> ++++++++++++++++++++
> include/configs/omap3_mvblx.h | 3 -
> include/configs/omap3_overo.h | 121 +++++--
> include/configs/omap3_pandora.h | 3 -
> include/configs/omap3_sdp3430.h | 3 -
> include/configs/omap3_zoom1.h | 3 -
> include/configs/omap3_zoom2.h | 3 -
> spl/Makefile | 13 +-
> tools/mxsboot.c | 3 +
> 86 files changed, 3006 insertions(+), 668 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/am33xx/config.mk
> delete mode 100644 arch/arm/cpu/armv7/am33xx/lowlevel_init.S
> create mode 100644 arch/arm/cpu/armv7/omap-common/boot-common.c
> rename {board/ti/am335x =>
> arch/arm/include/asm/arch-am33xx}/common_def.h (81%)
> create mode 100644 arch/arm/include/asm/arch-am33xx/mmc_host_def.h
> create mode 100644 arch/arm/include/asm/arch-am33xx/omap.h
> create mode 100644 board/cm_t35/eeprom.c
> create mode 100644 board/cm_t35/eeprom.h
> create mode 100644 board/freescale/mx28evk/Makefile
> create mode 100644 board/freescale/mx28evk/iomux.c
> create mode 100644 board/freescale/mx28evk/mx28evk.c
> create mode 100644 board/freescale/mx28evk/u-boot.bd
> create mode 100644 board/freescale/mx6qsabrelite/Makefile
> create mode 100644 board/freescale/mx6qsabrelite/imximage.cfg
> create mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c
> rename board/{overo/config.mk => logicpd/omap3som/Makefile} (61%)
> create mode 100644 board/logicpd/omap3som/omap3logic.c
> create mode 100644 board/logicpd/omap3som/omap3logic.h
> create mode 100644 doc/README.mx6qsabrelite
> delete mode 100644 include/configs/da850_am18xxevm.h
> create mode 100644 include/configs/mx28evk.h
> create mode 100644 include/configs/mx6qsabrelite.h
> create mode 100644 include/configs/omap3_logic.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Many aligators will be slain, but the swamp will remain.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
