Dear HeungJun, Kim,
On 6 January 2012 21:55, HeungJun, Kim <riverful....@samsung.com> wrote:
> This patch adds support for Samsung TRATS board
>
> Signed-off-by: HeungJun, Kim <riverful....@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> MAINTAINERS | 4 +
> board/samsung/trats/Makefile | 45 ++
> board/samsung/trats/lowlevel_init.S | 50 +++
> board/samsung/trats/lowlevel_util.c | 137 ++++++
> board/samsung/trats/trats.c | 250 +++++++++++
> board/samsung/trats/trats_setup.h | 812
> +++++++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/trats.h | 216 ++++++++++
> 8 files changed, 1515 insertions(+), 0 deletions(-)
> create mode 100644 board/samsung/trats/Makefile
> create mode 100644 board/samsung/trats/lowlevel_init.S
> create mode 100644 board/samsung/trats/lowlevel_util.c
> create mode 100644 board/samsung/trats/trats.c
> create mode 100644 board/samsung/trats/trats_setup.h
> create mode 100644 include/configs/trats.h
>
> diff --git a/board/samsung/trats/lowlevel_init.S
> b/board/samsung/trats/lowlevel_init.S
> new file mode 100644
> index 0000000..9159063
> --- /dev/null
> +++ b/board/samsung/trats/lowlevel_init.S
> @@ -0,0 +1,50 @@
> +/*
> + * Lowlevel setup for TRATS board based on EXYNOS4210
> + *
> + * Copyright (C) 2011 Samsung Electronics
> + * Heungjun Kim <riverful....@samsung.com>
> + * Kyungmin Park <kyungmin.p...@samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <config.h>
> +#include <version.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/clock.h>
> +#include "trats_setup.h"
> +
> + .globl pmu_init
> + .globl uart_init
> + .globl watchdog_disable
> + .globl clock_init
> + .globl pmic_reset
> +
> + .globl lowlevel_init
> +lowlevel_init:
> + push {lr}
> +
> + bl pmic_reset @ PMIC reset
> + bl clock_init @ Init Clock
> + bl watchdog_disable @ Disable Watchdog
> + bl uart_init @ Init UART
> + bl pmu_init @ Init PMU
> +
> + pop {pc}
> + nop
> diff --git a/board/samsung/trats/lowlevel_util.c
> b/board/samsung/trats/lowlevel_util.c
> new file mode 100644
> index 0000000..d67a095
> --- /dev/null
> +++ b/board/samsung/trats/lowlevel_util.c
> @@ -0,0 +1,137 @@
> +/*
> + * Copyright (C) 2011 Samsung Electronics
> + * Heungjun Kim <riverful....@samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include "trats_setup.h"
> +
> +void pmic_reset(void)
> +{
> + u32 base = EXYNOS4_GPIO_PART2_BASE;
> + u32 gpio;
> +
> + gpio = readl(base + EXYNOS4_GPIO_X2_CON_OFFSET);
> + gpio &= ~EXYNOS4_GPIO_X2_CON_MASK;
> + gpio |= EXYNOS4_GPIO_X2_CON_VAL;
> + writel(EXYNOS4_GPIO_X2_CON_VAL, base + EXYNOS4_GPIO_X2_CON_OFFSET);
> +
> + gpio = readl(base + EXYNOS4_GPIO_X2_DAT_OFFSET);
> + gpio |= EXYNOS4_GPIO_X2_DAT_VAL;
> + writel(gpio, base + EXYNOS4_GPIO_X2_DAT_OFFSET);
> +}
Please use structures instead of defines.
> +
> +void clock_init(void)
> +{
> + u32 base = EXYNOS4_CLOCK_BASE;
> +
> + writel(CLK_SRC_CPU_VAL, base + CLK_SRC_CPU_OFFSET);
> + writel(CLK_DIV_CPU0_VAL, base + CLK_DIV_CPU0_OFFSET);
> + writel(CLK_DIV_CPU1_VAL, base + CLK_DIV_CPU1_OFFSET);
> + writel(CLK_DIV_DMC0_VAL, base + CLK_DIV_DMC0_OFFSET);
> + writel(CLK_DIV_DMC1_VAL, base + CLK_DIV_DMC1_OFFSET);
> +
> + writel(CLK_SRC_TOP0_VAL, base + CLK_SRC_TOP0_OFFSET);
> + writel(CLK_SRC_FSYS_VAL, base + CLK_SRC_FSYS_OFFSET);
> + writel(CLK_SRC_PERIL0_VAL, base + CLK_SRC_PERIL0_OFFSET);
> +
> + writel(CLK_DIV_LEFTBUS_VAL, base + CLK_DIV_LEFTBUS_OFFSET);
> + writel(CLK_DIV_RIGHTBUS_VAL, base + CLK_DIV_RIGHTBUS_OFFSET);
> + writel(CLK_DIV_TOP_VAL, base + CLK_DIV_TOP_OFFSET);
> + writel(CLK_DIV_FSYS1_VAL, base + CLK_DIV_FSYS1_OFFSET);
> + writel(CLK_DIV_FSYS2_VAL, base + CLK_DIV_FSYS2_OFFSET);
> + writel(CLK_DIV_FSYS3_VAL, base + CLK_DIV_FSYS3_OFFSET);
> + writel(CLK_DIV_PERIL0_VAL, base + CLK_DIV_PERIL0_OFFSET);
> +
> + /* PLL Setting */
> + writel(PLL_LOCKTIME, base + APLL_LOCK_OFFSET);
> + writel(PLL_LOCKTIME, base + MPLL_LOCK_OFFSET);
> + writel(PLL_LOCKTIME, base + EPLL_LOCK_OFFSET);
> + writel(PLL_LOCKTIME, base + VPLL_LOCK_OFFSET);
> + writel(APLL_CON1_VAL, base + APLL_CON1_OFFSET);
> + writel(APLL_CON0_VAL, base + APLL_CON0_OFFSET);
> + writel(MPLL_CON1_VAL, base + MPLL_CON1_OFFSET);
> + writel(MPLL_CON0_VAL, base + MPLL_CON0_OFFSET);
> + writel(EPLL_CON1_VAL, base + EPLL_CON1_OFFSET);
> + writel(EPLL_CON0_VAL, base + EPLL_CON0_OFFSET);
> + writel(VPLL_CON1_VAL, base + VPLL_CON1_OFFSET);
> + writel(VPLL_CON0_VAL, base + VPLL_CON0_OFFSET);
> +
> + /* Clock Gating */
> + writel(CLK_GATE_IP_CAM_VAL, base + CLK_GATE_IP_CAM_OFFSET);
> + writel(CLK_GATE_IP_VP_VAL, base + CLK_GATE_IP_VP_OFFSET);
> + writel(CLK_GATE_IP_MFC_VAL, base + CLK_GATE_IP_MFC_OFFSET);
> + writel(CLK_GATE_IP_G3D_VAL, base + CLK_GATE_IP_G3D_OFFSET);
> + writel(CLK_GATE_IP_IMAGE_VAL, base + CLK_GATE_IP_IMAGE_OFFSET);
> + writel(CLK_GATE_IP_LCD0_VAL, base + CLK_GATE_IP_LCD0_OFFSET);
> + writel(CLK_GATE_IP_LCD1_VAL, base + CLK_GATE_IP_LCD1_OFFSET);
> + writel(CLK_GATE_IP_FSYS_VAL, base + CLK_GATE_IP_FSYS_OFFSET);
> + writel(CLK_GATE_IP_GPS_VAL, base + CLK_GATE_IP_GPS_OFFSET);
> + writel(CLK_GATE_IP_PERIL_VAL, base + CLK_GATE_IP_PERIL_OFFSET);
> + writel(CLK_GATE_IP_PERIR_VAL, base + CLK_GATE_IP_PERIR_OFFSET);
> + writel(CLK_GATE_BLOCK_VAL, base + CLK_GATE_BLOCK_OFFSET);
> +}
ditto.
> +
> +void watchdog_disable(void)
> +{
> + u32 base = EXYNOS4_WATCHDOG_BASE;
> + writel(0, base);
> +}
> +
> +void uart_init(void)
> +{
> + u32 base = EXYNOS4_GPIO_PART1_BASE;
> +
> + writel(EXYNOS4_GPIO_A0_CON_VAL, base + EXYNOS4_GPIO_A0_CON_OFFSET);
> + writel(EXYNOS4_GPIO_A1_CON_VAL, base + EXYNOS4_GPIO_A1_CON_OFFSET);
> +
> + /* UART_SEL */
> + base = EXYNOS4_GPIO_PART2_BASE;
> + writel(EXYNOS4_GPIO_Y4_CON_VAL, base + EXYNOS4_GPIO_Y4_CON_OFFSET);
> + writel(EXYNOS4_GPIO_Y4_PUD_VAL, base + EXYNOS4_GPIO_Y4_PUD_OFFSET);
> + writel(EXYNOS4_GPIO_Y4_DAT_VAL, base + EXYNOS4_GPIO_Y4_DAT_OFFSET);
ditto.
> +
> + base = EXYNOS4_UART_BASE;
> + base += EXYNOS4_DEFAULT_UART_OFFSET;
> + writel(ULCON_VAL, base + ULCON_OFFSET);
> + writel(UCON_VAL, base + UCON_OFFSET);
> + writel(UFCON_VAL, base + UFCON_OFFSET);
> + writel(UBRDIV_VAL, base + UBRDIV_OFFSET);
> + writel(UFRACVAL_VAL, base + UFRACVAL_OFFSET);
Actually, we don't need this.
It's duplicated setting.
Please remove it.
> +}
> +
> +void pmu_init(void)
> +{
> + u32 base = EXYNOS4_POWER_BASE;
> +
> + /* PS HOLD */
> + base += EXYNOS4_PS_HOLD_CON_OFFSET;
> + writel(EXYNOS4_PS_HOLD_CON_VAL, base);
> +
> + /* Set power down */
> + base += POWER_DOWN_OFFSET;
> + writel(0, base + POWER_TV_CONFIGURATION_OFFSET);
> + writel(0, base + POWER_MFC_CONFIGURATION_OFFSET);
> + writel(0, base + POWER_G3D_CONFIGURATION_OFFSET);
> + writel(0, base + POWER_LCD_CONFIGURATION_OFFSET);
> + writel(0, base + POWER_GPS_CONFIGURATION_OFFSET);
Please use structures instead of defines.
> +}
> diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
> new file mode 100644
> index 0000000..640108d
> --- /dev/null
> +++ b/board/samsung/trats/trats.c
> @@ -0,0 +1,250 @@
> +/*
> + * Copyright (C) 2011 Samsung Electronics
> + * Heungjun Kim <riverful....@samsung.com>
> + * Kyungmin Park <kyungmin.p...@samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/mmc.h>
> +#include <pmic.h>
> +#include <usb/s3c_udc.h>
> +#include <asm/arch/cpu.h>
> +#include <max8998_pmic.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +unsigned int board_rev;
> +
> +#ifdef CONFIG_REVISION_TAG
> +u32 get_board_rev(void)
> +{
> + return board_rev;
> +}
> +#endif
> +
> +static void check_hw_revision(void);
> +
> +int board_init(void)
> +{
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + check_hw_revision();
> + printf("HW Revision:\t0x%x\n", board_rev);
> +
> +#if defined(CONFIG_PMIC)
> + pmic_init();
> +#endif
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
> + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
> +
> + return 0;
> +}
> +
> +void dram_init_banksize(void)
> +{
> + gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> + gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> +}
> +
> +static unsigned int get_hw_revision(void)
> +{
> + struct exynos4_gpio_part1 *gpio;
> + int hwrev = 0;
> + int i;
> +
> + gpio = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
> +
> + /* hw_rev[3:0] == GPE1[3:0] */
> + for (i = 0; i < 4; i++) {
> + s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
> + s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
> + }
> +
> + udelay(1);
> +
> + for (i = 0; i < 4; i++)
> + hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
> +
> + debug("hwrev 0x%x\n", hwrev);
> +
> + return hwrev;
> +}
> +
> +static void check_hw_revision(void)
> +{
> + int hwrev;
> +
> + hwrev = get_hw_revision();
> +
> + board_rev |= hwrev;
> +}
> +
> +#ifdef CONFIG_DISPLAY_BOARDINFO
> +int checkboard(void)
> +{
> + puts("Board:\tTRATS\n");
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_GENERIC_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + struct exynos4_gpio_part2 *gpio;
> + int i, err;
> +
> + gpio = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
> +
> + /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
> + s5p_gpio_direction_output(&gpio->k0, 2, 1);
> + s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
> +
> + /*
> + * eMMC GPIO:
> + * SDR 8-bit@48MHz at MMC0
> + * GPK0[0] SD_0_CLK(2)
> + * GPK0[1] SD_0_CMD(2)
> + * GPK0[2] SD_0_CDn -> Not used
> + * GPK0[3:6] SD_0_DATA[0:3](2)
> + * GPK1[3:6] SD_0_DATA[0:3](3)
> + *
> + * DDR 4-bit@26MHz at MMC4
> + * GPK0[0] SD_4_CLK(3)
> + * GPK0[1] SD_4_CMD(3)
> + * GPK0[2] SD_4_CDn -> Not used
> + * GPK0[3:6] SD_4_DATA[0:3](3)
> + * GPK1[3:6] SD_4_DATA[4:7](4)
> + */
> + for (i = 0; i < 7; i++) {
> + if (i == 2)
> + continue;
> + /* GPK0[0:6] special function 2 */
> + s5p_gpio_cfg_pin(&gpio->k0, i, 0x2);
> + /* GPK0[0:6] pull disable */
> + s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE);
> + /* GPK0[0:6] drv 4x */
> + s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X);
> + }
> +
> + for (i = 3; i < 7; i++) {
> + /* GPK1[3:6] special function 3 */
> + s5p_gpio_cfg_pin(&gpio->k1, i, 0x3);
> + /* GPK1[3:6] pull disable */
> + s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE);
> + /* GPK1[3:6] drv 4x */
> + s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X);
> + }
> +
> + /*
> + * MMC device init
> + * mmc0 : eMMC (8-bit buswidth)
> + * mmc2 : SD card (4-bit buswidth)
> + */
> + err = s5p_mmc_init(0, 8);
> +
> + /* T-flash detect */
> + s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
> + s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
> +
> + /*
> + * Check the T-flash detect pin
> + * GPX3[4] T-flash detect pin
> + */
> + if (!s5p_gpio_get_value(&gpio->x3, 4)) {
> + /*
> + * SD card GPIO:
> + * GPK2[0] SD_2_CLK(2)
> + * GPK2[1] SD_2_CMD(2)
> + * GPK2[2] SD_2_CDn -> Not used
> + * GPK2[3:6] SD_2_DATA[0:3](2)
> + */
> + for (i = 0; i < 7; i++) {
> + if (i == 2)
> + continue;
> + /* GPK2[0:6] special function 2 */
> + s5p_gpio_cfg_pin(&gpio->k2, i, 0x2);
> + /* GPK2[0:6] pull disable */
> + s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE);
> + /* GPK2[0:6] drv 4x */
> + s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X);
> + }
> + err = s5p_mmc_init(2, 4);
> + }
> +
> + return err;
> +
Please remove this space.
> +}
> +#endif
> +
> +#ifdef CONFIG_USB_GADGET
> +static int s5pc210_phy_control(int on)
> +{
> + int ret = 0;
> + struct pmic *p = get_pmic();
> +
> + if (pmic_probe(p))
> + return -1;
> +
> + if (on) {
> + ret |= pmic_set_output(p,
> + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
> + MAX8998_SAFEOUT1, LDO_ON);
> + ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
> + MAX8998_LDO3, LDO_ON);
> + ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
> + MAX8998_LDO8, LDO_ON);
> +
> + } else {
> + ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
> + MAX8998_LDO8, LDO_OFF);
> + ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
> + MAX8998_LDO3, LDO_OFF);
> + ret |= pmic_set_output(p,
> + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
> + MAX8998_SAFEOUT1, LDO_OFF);
> + }
> +
> + if (ret) {
> + puts("MAX8998 LDO setting error!\n");
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +struct s3c_plat_otg_data s5pc210_otg_data = {
> + .phy_control = s5pc210_phy_control,
> + .regs_phy = EXYNOS4_USBPHY_BASE,
> + .regs_otg = EXYNOS4_USBOTG_BASE,
> + .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
> + .usb_flags = PHY0_SLEEP,
> +};
> +#endif
Thanks.
Minkyu Kang.
--
from. prom.
www.promsoft.net
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
