> make mx28evk_config? board/freescale/mx28evk Are you sure you checked it in? I checked, but I couldn't find it. (http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=include/configs;h=fe894c3b95e3d154264c2f8731b668c410131f01;hb=HEAD)
> Yes, it can go both ways. For the SoC I understand. But he PHYs on the Freescale don't, as far as I know. Anyway, the Denx module probably uses more advanced PHYs. > The PHY doesn't supply clock on mx28evk, CPU does. I'm glad we agree here. > Yea ... > > M28EVK: PHY supplies clock to CPU > MX28EVK: CPU supplies clock to PHY It's getting rather obvious, now you've given me a bit of insight in the differences between both boards. Thanks. > Still, the support is already there. I figured that too; I expected you probably made that first before moving on to the Denx module. But I couldn't find it. At first I thought m28evk_config would support it (too). The similarity in names suggests similarity in boards. But after patching too much code, I figured to implement mx28evk_config and board/freescale/mx28evk myself. What a waste of time.... At least it was a good exercise before our product boards arrive next week. I just pulled my git repository and Make can't find a rule to make mx28evk_config, so it's really not there. Not even hidden in another configuration. Wasn't it removed, since the Freescale implementation in 2009.08 broke? Robert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
