Am Donnerstag, den 22.12.2011, 19:58 +0100 schrieb Ricardo Ribalda Delgado: > Hello Stephan
Hello Recardo, > > I just checked it, and I am using v7 :) from: > http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/ OK, fine. > Once it is > applied I will post the patches for xilinx-ppc440-generic (mainly > instantiate it in the config...) Nice to hear that. So we know the driver consists no bad code and can be applied as fast as possible. > > I have tried to download an image with the dhcp command over 100 and > 1000M... I have to work more on it, but it looks promising. If you > need an specific test, just say it, tomorrow I will be working with > the board. > > Thanks again for the patch, it was very needed for u-boot. :) br, Stephan > > Regards > > > On Thu, Dec 22, 2011 at 19:52, Stephan Linz <l...@li-pro.net> wrote: > > Hello Recardo, > > > > Am Donnerstag, den 22.12.2011, 17:06 +0100 schrieb Ricardo Ribalda > > Delgado: > >> Hello Stefan, > >> Hello Wolfgang, > >> Hello Michal, > >> > >> I have tried the code on a Propietary Virtex5 fx board (ppc440) and it > >> works.... Thanks for your work. > > > > OK, thanks for your efforts. Would it be possible for you to test even > > the latest v7 patch? There were some critical changes between v6 and v7, > > especially timeout regime, function pointers for plattform specific > > in/out accessors, and MDIO clock calculation. > > -- Best regards, Stephan Linz ______________________________________________________________________________ MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start OpenDCC: http://www.li-pro.net/opendcc.phtml PC/M: http://www.li-pro.net/pcm.phtml Sourceforge: http://sourceforge.net/users/slz Gitorious: https://gitorious.org/~slz _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
