Hi Marek,
On Wed, Dec 14, 2011 at 6:51 PM, Marek Vasut <marek.va...@gmail.com> wrote:
>> +void imx_get_mac_from_fuse(char *mac)
>> +{
>> + memset(mac, 0, 6);
>
> OCOTP code is no good for you?
It works fine, except that it only gets the correct MAC for FEC0:
Warning: FEC1 MAC addresses don't match:
Address in SROM is 00:04:9f:01:d2:94
Address in environment is 00:04:9f:01:d2:95
ethaddr=00:04:9F:01:D2:94
eth1addr=00:04:9F:01:D2:95
Also, I see that on m28evk this code is not being used because
CONFIG_M28_FEC_MAC_IN_OCOTP
is not defined.
I think we should move this function to common code. To avoid the dual
FEC MAC issue for now, I can also use a single FEC instead, as I
probably won't have time to investigate this during this year.
...
>> --- /dev/null
>> +++ b/board/freescale/mx28evk/u-boot.bd
>> @@ -0,0 +1,14 @@
>> +sources {
>> + u_boot_spl="spl/u-boot-spl.bin";
>> + u_boot="u-boot.bin";
>> +}
>> +
>> +section (0) {
>> + load u_boot_spl > 0x0000;
>> + load ivt (entry = 0x0014) > 0x8000;
>> + hab call 0x8000;
>> +
>> + load u_boot > 0x40000100;
>> + load ivt (entry = 0x40000100) > 0x8000;
>> + hab call 0x8000;
>
> Change the indent here to tabs please, similar patch is queued mainline for
> m28.
Ok
...
>> + * Extra Environments
>> + */
>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>> + "console_fsl=console=ttyAM0" \
>
> ttyAM? You sure?
Yes, FSL BSP uses ttyAM0. Mainline kernel uses ttyAMA0.
I left the mainline version as default.
Thanks,
Fabio Estevan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
