From: Simon Schwarz <simonschwarz...@googlemail.com> This adds Linux booting to the SPL
This depends on CONFIG_MACH_TYPE patch by Igor Grinberg (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/105809) Related CONFIGs: CONFIG_SPL_OS_BOOT Activates/Deactivates the OS booting feature CONFIG_SPL_OS_BOOT_KEY defines the IO-pin number u-boot switch - if pressed u-boot is booted CONFIG_SYS_NAND_SPL_KERNEL_OFFS Offset in NAND of direct boot kernel image to use in SPL CONFIG_SYS_SPL_ARGS_ADDR Address where the kernel boot arguments are expected - this is normaly RAM-begin + 0x100 Signed-off-by: Simon Schwarz <simonschwarz...@gmail.com> --- V2 changes: nothing V3 changes: nothing V4 changes: CHG Using CONFIG_MACH_TYPE now. DEL CONFIG_SYS_SPL_MACHID CHG Use CONFIG_MACH_TYPE for machine id config - This makes the patch depending on the patch linked above V5 changes: FIX compile errors for OMAP4 REBASE u-boot-ti adapted new general gpio interface V6 changes: nothing V7 changes: FIX multiline comment style (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/113501) V8 changes: REBASE on u-boot --- arch/arm/cpu/armv7/omap-common/spl.c | 51 ++++++++++++++++++++++++++++++++- include/configs/devkit8000.h | 6 +++- 2 files changed, 54 insertions(+), 3 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c index d6d7d65..a739ba7 100644 --- a/arch/arm/cpu/armv7/omap-common/spl.c +++ b/arch/arm/cpu/armv7/omap-common/spl.c @@ -35,6 +35,7 @@ #include <i2c.h> #include <image.h> #include <malloc.h> +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -64,6 +65,26 @@ void board_init_f(ulong dummy) relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE); } +/* + * Return the value of the U-boot key + * + * RETURN + * 0 if not pressed + * positiv if pressed + */ +#ifdef CONFIG_SPL_OS_BOOT +int spl_uboot_key(void) +{ + int val = 0; + if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) { + gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY); + val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY); + gpio_free(CONFIG_SPL_OS_BOOT_KEY); + } + return !val; +} +#endif + void spl_parse_image_header(const struct image_header *header) { u32 header_size = sizeof(struct image_header); @@ -91,7 +112,26 @@ void spl_parse_image_header(const struct image_header *header) } } -static void jump_to_image_no_args(void) +/* + * This function jumps to an image with argument. Normally an FDT or ATAGS + * image. + * arg: Pointer to paramter image in RAM + */ +#ifdef CONFIG_SPL_OS_BOOT +void jump_to_image_linux(void *arg) +{ + debug("Entering kernel arg pointer: 0x%X\n", arg); + typedef void (*image_entry_arg_t)(int, int, void *) + __attribute__ ((noreturn)); + image_entry_arg_t image_entry = + (image_entry_arg_t) spl_image.entry_point; + /* cleanup_before_linux(); */ /*write SPL function for that*/ + image_entry(0, CONFIG_MACH_TYPE, arg); +} +void jump_to_image_linux(void *) __attribute__ ((noreturn)); +#endif + +void jump_to_image_no_args(void) { typedef void (*image_entry_noargs_t)(u32 *)__attribute__ ((noreturn)); image_entry_noargs_t image_entry = @@ -104,8 +144,8 @@ static void jump_to_image_no_args(void) #endif image_entry((u32 *)&boot_params_ptr); } - void jump_to_image_no_args(void) __attribute__ ((noreturn)); + void board_init_r(gd_t *id, ulong dummy) { u32 boot_device; @@ -142,6 +182,13 @@ void board_init_r(gd_t *id, ulong dummy) debug("Jumping to U-Boot\n"); jump_to_image_no_args(); break; +#ifdef CONFIG_SPL_OS_BOOT + case IH_OS_LINUX: + debug("Jumping to Linux\n"); + spl_board_prepare_for_linux(); + jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR); + break; +#endif default: puts("Unsupported OS image.. Jumping nevertheless..\n"); jump_to_image_no_args(); diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index bb7509b..668253f 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -36,6 +36,7 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ +#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM @@ -339,7 +340,7 @@ #define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ +#define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* NAND boot config */ @@ -373,6 +374,9 @@ #define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\ 0x400000) +#define CONFIG_SPL_OS_BOOT +#define CONFIG_SPL_OS_BOOT_KEY 26 + #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) #endif /* __CONFIG_H */ -- 1.7.4.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
