Marek,
Can you please show me your 'fdisk -l' output on a SD card that you
use for booting M28EVK board?
Mine is as following:
$ sudo fdisk -l /dev/mmcblk0
Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes
3 heads, 32 sectors/track, 80672 cylinders
Units = cylinders of 96 * 512 = 49152 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x24efc022
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 2048 2069 1056 53 OnTrack DM6 Aux3
I am working on adding support for MX28EVK, but no U-boot prompt yet.
Followed your README.m28 document for flashing u-boot.sd into the SD card.
Regards,
Fabio Estevam
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
