Hi Stephen, On Mon, Nov 21, 2011 at 3:30 PM, Stephen Warren <swar...@nvidia.com> wrote: > On 11/21/2011 04:07 PM, Simon Glass wrote: >> Hi, >> >> For reference, here is (I believe) the current list of Tegra patches >> required become submitting new patches. I note a few conflicts > > s/required become/required in your local branch before your changes/ ?
s/become/before/ > >> already, so this will take a little sorting out once the tegra tree is >> live. > > I assume that means we can assume these are all accepted and will be > merged, so we should apply them locally and build on top of them? > > Is there a status update for the creation of a Tegra git that we could > fetch and branch from ? Well I could put up a tree, but it's a bit dangerous - the real place is patchwork. > > Note that already, I think some of the later patches need rework given > earlier ones, e.g. there was some change to board/nvidia/common/Makefile > that required other boards using it to be updated, but the Ventana > Makefile wasn't IIRC. I guess that's what you meant by conflicts. Yes that's right. Hopefully the pain will reduce soon! > > Thanks for the list! You are welcome. Regards, Simon > >> 31b9b64 tegra2: Move board_mmc_init into board files >> fbbb238 tegra2: Modify MMC driver to handle power and cd GPIOs >> 187643e tegra2: Add support for Ventana >> 7f27b57 tegra2: Use new GPIO APIs in gpio_config_uart() >> 6b61458 tegra2: Add arch_cpu_init() to fire up Cortex-A9 >> eda293e tegra2: Simplify tegra_start() boot path >> 34e9d46 arm: Move CP15 init out of cpu_init_crit() >> 3e75dfa tegra2: Enable instruction cache >> f9c505b tegra2: Remove unneeded boot code >> 788bfea tegra2: Remove unneeded config option >> ad525dc tegra2: Remove unused low-level Tegra2 UART code >> 29843f0 tegra2: Remove unneeded 'dynamic ram size' message >> 7c6c3ae tegra2: Don't use board pointer before it is set up >> 5cc0dad tegra2: Tidy UART selection >> 845f1c6 tegra2: Add UARTB support >> 33977b1 tegra2: spi: Add SPI driver for Tegra2 SOC >> 61d1db1 tegra2: config: Enable SPI flash on Seaboard >> 57e2005 tegra2: Enable SPI environment on Seaboard >> 707ae71 tegra2: Implement SPI / UART GPIO switch >> 024baf8 tegra2: spi: Support SPI / UART switch >> 930fe9f tegra2: Plumb in SPI/UART switch code >> 40b415f tegra2: Always build with USE_PRIVATE_LIBGCC=yes. >> 0ec937a tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. >> 2936c6b tegra2: Move tegra2_mmc_init() prototype to public header. >> d75bb9f tegra2: Add common Avionic Design Tamonten support. >> 6205647 tegra2: Add Avionic Design Plutux support. >> 0b526ff (HEAD, denx/us-tegra, us-tegra) tegra2: Add Avionic Design >> Medcom support > > -- > nvpublic > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
