On 11/21/2011 04:07 PM, Simon Glass wrote: > Hi, > > For reference, here is (I believe) the current list of Tegra patches > required become submitting new patches. I note a few conflicts
s/required become/required in your local branch before your changes/ ? > already, so this will take a little sorting out once the tegra tree is > live. I assume that means we can assume these are all accepted and will be merged, so we should apply them locally and build on top of them? Is there a status update for the creation of a Tegra git that we could fetch and branch from ? Note that already, I think some of the later patches need rework given earlier ones, e.g. there was some change to board/nvidia/common/Makefile that required other boards using it to be updated, but the Ventana Makefile wasn't IIRC. I guess that's what you meant by conflicts. Thanks for the list! > 31b9b64 tegra2: Move board_mmc_init into board files > fbbb238 tegra2: Modify MMC driver to handle power and cd GPIOs > 187643e tegra2: Add support for Ventana > 7f27b57 tegra2: Use new GPIO APIs in gpio_config_uart() > 6b61458 tegra2: Add arch_cpu_init() to fire up Cortex-A9 > eda293e tegra2: Simplify tegra_start() boot path > 34e9d46 arm: Move CP15 init out of cpu_init_crit() > 3e75dfa tegra2: Enable instruction cache > f9c505b tegra2: Remove unneeded boot code > 788bfea tegra2: Remove unneeded config option > ad525dc tegra2: Remove unused low-level Tegra2 UART code > 29843f0 tegra2: Remove unneeded 'dynamic ram size' message > 7c6c3ae tegra2: Don't use board pointer before it is set up > 5cc0dad tegra2: Tidy UART selection > 845f1c6 tegra2: Add UARTB support > 33977b1 tegra2: spi: Add SPI driver for Tegra2 SOC > 61d1db1 tegra2: config: Enable SPI flash on Seaboard > 57e2005 tegra2: Enable SPI environment on Seaboard > 707ae71 tegra2: Implement SPI / UART GPIO switch > 024baf8 tegra2: spi: Support SPI / UART switch > 930fe9f tegra2: Plumb in SPI/UART switch code > 40b415f tegra2: Always build with USE_PRIVATE_LIBGCC=yes. > 0ec937a tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. > 2936c6b tegra2: Move tegra2_mmc_init() prototype to public header. > d75bb9f tegra2: Add common Avionic Design Tamonten support. > 6205647 tegra2: Add Avionic Design Plutux support. > 0b526ff (HEAD, denx/us-tegra, us-tegra) tegra2: Add Avionic Design > Medcom support -- nvpublic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
