On Sun, Nov 13, 2011 at 12:10 AM, Dirk Behme <dirk.be...@googlemail.com> wrote:
> On 12.11.2011 11:36, Jason Liu wrote:
>>
>> This patch-set add the initial support for freescale i.mx6q support.
>> freescale i.mx6q is a quad core built on arm cortex_a9 complex.
>>
>> The patch-set has been tested ok on freescale i.mx6q Armadillo2 board and
>> also
>> make sure it does not break i.mx5 support
>>
>> Jason Liu (6):
>> i.mx: i.mx5: Move some files to imx-common folder
>> i.mx: Add the initial support for freescale i.MX6Q processor
>
> Hmm, this patch, i.e. patch 2/6, is missing at the mailing list?
Yes, I noticed that it's due to 2/6 is big and not sent successfully
on the mail-list.
I will try to rework it and send it out later.
Jason Liu
>
> Dirk
>
>> i.mx: mxc_gpio: add the i.mx6q support
>> i.mx: serial_mxc: add the i.mx6q support
>> i.mx: fsl_esdhc: add the i.mx6q support
>> i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board
>>
>> MAINTAINERS | 1 +
>> Makefile | 7 +
>> arch/arm/cpu/armv7/imx-common/Makefile | 47 +
>> arch/arm/cpu/armv7/imx-common/cpu_info.c | 108 ++
>> arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
>> arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
>> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
>> arch/arm/cpu/armv7/mx5/soc.c | 77 -
>> arch/arm/cpu/armv7/mx6/Makefile | 48 +
>> arch/arm/cpu/armv7/mx6/clock.c | 388 +++++
>> arch/arm/cpu/armv7/mx6/iomux-v3.c | 76 +
>> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 60 +
>> arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} | 40 +-
>> arch/arm/include/asm/arch-mx6/ccm_regs.h | 894 +++++++++++
>> .../mx5/speed.c => include/asm/arch-mx6/clock.h} | 45 +-
>> .../mx5/speed.c => include/asm/arch-mx6/gpio.h} | 28 +-
>> arch/arm/include/asm/arch-mx6/imx-regs.h | 233 +++
>> arch/arm/include/asm/arch-mx6/iomux-v3.h | 104 ++
>> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
>> ++++++++++++++++++++
>> .../speed.c => include/asm/arch-mx6/sys_proto.h} | 31 +-
>> board/freescale/mx6qarm2/Makefile | 48 +
>> board/freescale/mx6qarm2/imximage.cfg | 167 ++
>> board/freescale/mx6qarm2/mx6qarm2.c | 163 ++
>> boards.cfg | 1 +
>> drivers/gpio/mxc_gpio.c | 4 +-
>> drivers/mmc/fsl_esdhc.c | 14 +-
>> drivers/serial/serial_mxc.c | 10 +-
>> include/configs/mx6qarm2.h | 163 ++
>> 28 files changed, 4303 insertions(+), 156 deletions(-)
>> create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
>> create mode 100644 arch/arm/cpu/armv7/imx-common/cpu_info.c
>> copy arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
>> rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
>> mode change 100644 => 100755
>> create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
>> create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
>> create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
>> create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
>> copy arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} (57%)
>> create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
>> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/clock.h}
>> (59%)
>> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/gpio.h}
>> (65%)
>> create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
>> create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
>> create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
>> rename arch/arm/{cpu/armv7/mx5/speed.c =>
>> include/asm/arch-mx6/sys_proto.h} (65%)
>> create mode 100644 board/freescale/mx6qarm2/Makefile
>> create mode 100644 board/freescale/mx6qarm2/imximage.cfg
>> create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
>> create mode 100644 include/configs/mx6qarm2.h
>>
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
