On 12.11.2011 11:36, Jason Liu wrote:
> This patch-set add the initial support for freescale i.mx6q support.
> freescale i.mx6q is a quad core built on arm cortex_a9 complex.
>
> The patch-set has been tested ok on freescale i.mx6q Armadillo2 board and also
> make sure it does not break i.mx5 support
>
> Jason Liu (6):
> i.mx: i.mx5: Move some files to imx-common folder
> i.mx: Add the initial support for freescale i.MX6Q processor
Hmm, this patch, i.e. patch 2/6, is missing at the mailing list?
Dirk
> i.mx: mxc_gpio: add the i.mx6q support
> i.mx: serial_mxc: add the i.mx6q support
> i.mx: fsl_esdhc: add the i.mx6q support
> i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board
>
> MAINTAINERS | 1 +
> Makefile | 7 +
> arch/arm/cpu/armv7/imx-common/Makefile | 47 +
> arch/arm/cpu/armv7/imx-common/cpu_info.c | 108 ++
> arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
> arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> arch/arm/cpu/armv7/mx5/soc.c | 77 -
> arch/arm/cpu/armv7/mx6/Makefile | 48 +
> arch/arm/cpu/armv7/mx6/clock.c | 388 +++++
> arch/arm/cpu/armv7/mx6/iomux-v3.c | 76 +
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 60 +
> arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} | 40 +-
> arch/arm/include/asm/arch-mx6/ccm_regs.h | 894 +++++++++++
> .../mx5/speed.c => include/asm/arch-mx6/clock.h} | 45 +-
> .../mx5/speed.c => include/asm/arch-mx6/gpio.h} | 28 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 233 +++
> arch/arm/include/asm/arch-mx6/iomux-v3.h | 104 ++
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
> ++++++++++++++++++++
> .../speed.c => include/asm/arch-mx6/sys_proto.h} | 31 +-
> board/freescale/mx6qarm2/Makefile | 48 +
> board/freescale/mx6qarm2/imximage.cfg | 167 ++
> board/freescale/mx6qarm2/mx6qarm2.c | 163 ++
> boards.cfg | 1 +
> drivers/gpio/mxc_gpio.c | 4 +-
> drivers/mmc/fsl_esdhc.c | 14 +-
> drivers/serial/serial_mxc.c | 10 +-
> include/configs/mx6qarm2.h | 163 ++
> 28 files changed, 4303 insertions(+), 156 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
> create mode 100644 arch/arm/cpu/armv7/imx-common/cpu_info.c
> copy arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
> rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
> mode change 100644 => 100755
> create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
> create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
> create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
> create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
> copy arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} (57%)
> create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/clock.h} (59%)
> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/gpio.h} (65%)
> create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
> rename arch/arm/{cpu/armv7/mx5/speed.c =>
> include/asm/arch-mx6/sys_proto.h} (65%)
> create mode 100644 board/freescale/mx6qarm2/Makefile
> create mode 100644 board/freescale/mx6qarm2/imximage.cfg
> create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
> create mode 100644 include/configs/mx6qarm2.h
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
