Signed-off-by: Graeme Russ <graeme.r...@gmail.com>
---
./checkpatch.pl --no-tree -f arch/x86/cpu/sc520/*.c
total: 0 errors, 0 warnings, 66 lines checked
arch/x86/cpu/sc520/sc520.c has no obvious style problems and is ready for
submission.
WARNING: line over 80 characters
#84: FILE: x86/cpu/sc520/sc520_pci.c:84:
+ if (readb(&sc520_mmcr->pci_int_map[i]) ==
sc520_irq[irq].priority)
WARNING: line over 80 characters
#90: FILE: x86/cpu/sc520/sc520_pci.c:90:
+ if (readb(&sc520_mmcr->gp_int_map[i]) ==
sc520_irq[irq].priority)
total: 0 errors, 2 warnings, 140 lines checked
arch/x86/cpu/sc520/sc520_pci.c has style problems, please review. If any of
these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
total: 0 errors, 0 warnings, 40 lines checked
arch/x86/cpu/sc520/sc520_reset.c has no obvious style problems and is ready for
submission.
ERROR: need consistent spacing around '%' (ctx:WxV)
#433: FILE: x86/cpu/sc520/sc520_sdram.c:433:
+ movl %eax, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#433: FILE: x86/cpu/sc520/sc520_sdram.c:433:
+ movl %eax, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#434: FILE: x86/cpu/sc520/sc520_sdram.c:434:
+ shrl $0x1, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#435: FILE: x86/cpu/sc520/sc520_sdram.c:435:
+ movl $0x1, %edi
^
ERROR: spaces required around that ':' (ctx:VxE)
#436: FILE: x86/cpu/sc520/sc520_sdram.c:436:
+memtest0:
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#440: FILE: x86/cpu/sc520/sc520_sdram.c:440:
+ shrl $0x1, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#441: FILE: x86/cpu/sc520/sc520_sdram.c:441:
+ andl %ecx, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#441: FILE: x86/cpu/sc520/sc520_sdram.c:441:
+ andl %ecx, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#443: FILE: x86/cpu/sc520/sc520_sdram.c:443:
+ shll $0x1, %edi
^
ERROR: spaces required around that ':' (ctx:VxE)
#446: FILE: x86/cpu/sc520/sc520_sdram.c:446:
+set_ecc:
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#448: FILE: x86/cpu/sc520/sc520_sdram.c:448:
+ movl %eax, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#448: FILE: x86/cpu/sc520/sc520_sdram.c:448:
+ movl %eax, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#449: FILE: x86/cpu/sc520/sc520_sdram.c:449:
+ xorl %esi, %esi
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#449: FILE: x86/cpu/sc520/sc520_sdram.c:449:
+ xorl %esi, %esi
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#450: FILE: x86/cpu/sc520/sc520_sdram.c:450:
+ xorl %edi, %edi
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#450: FILE: x86/cpu/sc520/sc520_sdram.c:450:
+ xorl %edi, %edi
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#451: FILE: x86/cpu/sc520/sc520_sdram.c:451:
+ xorl %eax, %eax
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#451: FILE: x86/cpu/sc520/sc520_sdram.c:451:
+ xorl %eax, %eax
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#452: FILE: x86/cpu/sc520/sc520_sdram.c:452:
+ shrl $0x2, %ecx
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#457: FILE: x86/cpu/sc520/sc520_sdram.c:457:
+ movb $0x11, %al
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#458: FILE: x86/cpu/sc520/sc520_sdram.c:458:
+ movl $DBCTL, %edi
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#459: FILE: x86/cpu/sc520/sc520_sdram.c:459:
+ movb %al, (%edi)
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#462: FILE: x86/cpu/sc520/sc520_sdram.c:462:
+ movl $ECCINT, %edi
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#463: FILE: x86/cpu/sc520/sc520_sdram.c:463:
+ movb $0x10, %al
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#464: FILE: x86/cpu/sc520/sc520_sdram.c:464:
+ movb %al, (%edi)
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#467: FILE: x86/cpu/sc520/sc520_sdram.c:467:
+ movl $ECCCTL, %edi
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#468: FILE: x86/cpu/sc520/sc520_sdram.c:468:
+ movb $0x05, %al
^
ERROR: need consistent spacing around '%' (ctx:WxV)
#469: FILE: x86/cpu/sc520/sc520_sdram.c:469:
+ movb %al,(%edi)
^
ERROR: space required after that ',' (ctx:VxV)
#469: FILE: x86/cpu/sc520/sc520_sdram.c:469:
+ movb %al,(%edi)
^
ERROR: spaces required around that ':' (ctx:VxE)
#471: FILE: x86/cpu/sc520/sc520_sdram.c:471:
+out:
^
total: 30 errors, 0 warnings, 532 lines checked
arch/x86/cpu/sc520/sc520_sdram.c has style problems, please review. If any of
these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
total: 0 errors, 0 warnings, 93 lines checked
arch/x86/cpu/sc520/sc520_ssi.c has no obvious style problems and is ready for
submission.
total: 0 errors, 0 warnings, 90 lines checked
arch/x86/cpu/sc520/sc520_timer.c has no obvious style problems and is ready for
submission.
arch/x86/cpu/sc520/sc520.c | 2 +-
arch/x86/cpu/sc520/sc520_pci.c | 16 +++++++-------
arch/x86/cpu/sc520/sc520_ssi.c | 43 +++++++++++++++++++------------------
arch/x86/cpu/sc520/sc520_timer.c | 4 +-
4 files changed, 33 insertions(+), 32 deletions(-)
diff --git a/arch/x86/cpu/sc520/sc520.c b/arch/x86/cpu/sc520/sc520.c
index 4892c01..3fe85e7 100644
--- a/arch/x86/cpu/sc520/sc520.c
+++ b/arch/x86/cpu/sc520/sc520.c
@@ -49,7 +49,7 @@ int cpu_init_f(void)
asm("movl $0x2000, %%ecx\n"
"0: pushl %%ecx\n"
"popl %%ecx\n"
- "loop 0b\n": : : "ecx");
+ "loop 0b\n" : : : "ecx");
return x86_cpu_init_f();
}
diff --git a/arch/x86/cpu/sc520/sc520_pci.c b/arch/x86/cpu/sc520/sc520_pci.c
index e26793a..70155a1 100644
--- a/arch/x86/cpu/sc520/sc520_pci.c
+++ b/arch/x86/cpu/sc520/sc520_pci.c
@@ -70,25 +70,23 @@ int pci_sc520_set_irq(int pci_pin, int irq)
debug("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
- if (irq < 0 || irq > 15) {
+ if (irq < 0 || irq > 15)
return -1; /* illegal irq */
- }
- if (pci_pin < 0 || pci_pin > 15) {
+ if (pci_pin < 0 || pci_pin > 15)
return -1; /* illegal pci int pin */
- }
/* first disable any non-pci interrupt source that use
* this level */
/* PCI interrupt mapping (A through D)*/
- for (i=0; i<=3 ;i++) {
+ for (i = 0; i <= 3 ; i++) {
if (readb(&sc520_mmcr->pci_int_map[i]) ==
sc520_irq[irq].priority)
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[i]);
}
/* GP IRQ interrupt mapping */
- for (i=0; i<=10 ;i++) {
+ for (i = 0; i <= 10 ; i++) {
if (readb(&sc520_mmcr->gp_int_map[i]) ==
sc520_irq[irq].priority)
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_int_map[i]);
}
@@ -102,10 +100,12 @@ int pci_sc520_set_irq(int pci_pin, int irq)
if (pci_pin < 4) {
/* PCI INTA-INTD */
/* route the interrupt */
- writeb(sc520_irq[irq].priority,
&sc520_mmcr->pci_int_map[pci_pin]);
+ writeb(sc520_irq[irq].priority,
+ &sc520_mmcr->pci_int_map[pci_pin]);
} else {
/* GPIRQ0-GPIRQ10 used for additional PCI INTS */
- writeb(sc520_irq[irq].priority, &sc520_mmcr->gp_int_map[pci_pin
- 4]);
+ writeb(sc520_irq[irq].priority,
+ &sc520_mmcr->gp_int_map[pci_pin - 4]);
/* also set the polarity in this case */
tmpw = readw(&sc520_mmcr->intpinpol);
diff --git a/arch/x86/cpu/sc520/sc520_ssi.c b/arch/x86/cpu/sc520/sc520_ssi.c
index 3a6a858..cc601e5 100644
--- a/arch/x86/cpu/sc520/sc520_ssi.c
+++ b/arch/x86/cpu/sc520/sc520_ssi.c
@@ -28,37 +28,33 @@
int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
{
- u8 temp=0;
+ u8 temp = 0;
- if (freq >= 8192) {
+ if (freq >= 8192)
temp |= CTL_CLK_SEL_4;
- } else if (freq >= 4096) {
+ else if (freq >= 4096)
temp |= CTL_CLK_SEL_8;
- } else if (freq >= 2048) {
+ else if (freq >= 2048)
temp |= CTL_CLK_SEL_16;
- } else if (freq >= 1024) {
+ else if (freq >= 1024)
temp |= CTL_CLK_SEL_32;
- } else if (freq >= 512) {
+ else if (freq >= 512)
temp |= CTL_CLK_SEL_64;
- } else if (freq >= 256) {
+ else if (freq >= 256)
temp |= CTL_CLK_SEL_128;
- } else if (freq >= 128) {
+ else if (freq >= 128)
temp |= CTL_CLK_SEL_256;
- } else {
+ else
temp |= CTL_CLK_SEL_512;
- }
- if (!lsb_first) {
+ if (!lsb_first)
temp |= MSBF_ENB;
- }
- if (inv_clock) {
+ if (inv_clock)
temp |= CLK_INV_ENB;
- }
- if (inv_phase) {
+ if (inv_phase)
temp |= PHS_INV_ENB;
- }
writeb(temp, &sc520_mmcr->ssictl);
@@ -68,9 +64,11 @@ int ssi_set_interface(int freq, int lsb_first, int
inv_clock, int inv_phase)
u8 ssi_txrx_byte(u8 data)
{
writeb(data, &sc520_mmcr->ssixmit);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
+ ;
writeb(SSICMD_CMD_SEL_XMITRCV, &sc520_mmcr->ssicmd);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
+ ;
return readb(&sc520_mmcr->ssircv);
}
@@ -78,15 +76,18 @@ u8 ssi_txrx_byte(u8 data)
void ssi_tx_byte(u8 data)
{
writeb(data, &sc520_mmcr->ssixmit);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
+ ;
writeb(SSICMD_CMD_SEL_XMIT, &sc520_mmcr->ssicmd);
}
u8 ssi_rx_byte(void)
{
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
+ ;
writeb(SSICMD_CMD_SEL_RCV, &sc520_mmcr->ssicmd);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
+ ;
return readb(&sc520_mmcr->ssircv);
}
diff --git a/arch/x86/cpu/sc520/sc520_timer.c b/arch/x86/cpu/sc520/sc520_timer.c
index 05bc9c1..495a694 100644
--- a/arch/x86/cpu/sc520/sc520_timer.c
+++ b/arch/x86/cpu/sc520/sc520_timer.c
@@ -38,7 +38,7 @@ void sc520_timer_isr(void)
int timer_init(void)
{
/* Register the SC520 specific timer interrupt handler */
- register_timer_isr (sc520_timer_isr);
+ register_timer_isr(sc520_timer_isr);
/* Install interrupt handler for GP Timer 1 */
irq_install_handler (0, timer_isr, NULL);
@@ -62,7 +62,7 @@ int timer_init(void)
writew(100, &sc520_mmcr->gptmr1maxcmpa);
writew(0xe009, &sc520_mmcr->gptmr1ctl);
- unmask_irq (0);
+ unmask_irq(0);
/* Clear the GP Timer 1 status register to get the show rolling*/
writeb(0x02, &sc520_mmcr->gptmrsta);
--
1.7.5.2.317.g391b14
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
