Dear Macpaul Lin,
In message <1319092871-28135-8-git-send-email-macp...@andestech.com> you wrote:
> Add evaluation board "adp-ag101" configuration file adp-ag101.h.
> Add adp-ag101.c board config and related settings.
> Add board adp-ag101 into boards.cfg
>
> Signed-off-by: Macpaul Lin <macp...@andestech.com>
> ---
> Changes for v1-v4:
> - code clean up
> Changes for v5-v6:
> - Refine the definitions and parameters about CLK,
> AHB controller, SDRAM controller, Static memory controllers.
> - Add APB_CLK, AHB_CLK, SYS_CLK definitions for backward compatible.
> - ftahbc010:
> - Update include path of ftahbc010.
> - ftsdmc021:
> - Update include path of ftsdmc021.
> - ftsmc020:
> - Update include path of ftsmc020.
> - ftwdt010:
> - Fix WDT define and update include path.
> - Fix ftwdt010 for hardware reset.
> - ftpmu010:
> - Remove duplicate PMU definitions.
> - Add related configurations.
> - Fix MAX malloc len and fix saveenv.
> - clean up.
> Changes for v7:
> - clean up.
> - Move CONFIG_SYS_TEXT_BASE from board/config.mk.
> - Fix Makefile and remove config.mk
> Changes for v8:
> - No change.
> Changes for v9:
> - Fix because other boards has been added into boards.cfg and
> broken this patch.
> Changes for v10:
> - adp-ag101.h
> - Fix lines over 80 characters.
> - Fix for introducing gen-asm-offset.
> - Add mmc support for FTSDC010 SD/MMC Controller.
> - fix flash init.
> - fix ftsmc010 configuraion for flash probing.
> - Add SP_INIT related configurations for supporting relocation.
> - Fix CONFIG_TEXT_BASE for relocation.
> - Add CONFIG_MEM_REMAP for some hardware boards and non-OS application.
> - adp-ag101.c
> - Clean up for braces according to Wolfgang's suggestion.
> - Add mmc support for FTSDC010 SD/MMC Controller.
> - fix dram init(), made this more simpler.
> Changes for v11:
> - No change.
> Changes for v12:
> - adp-ag101.h
> - fix address when enable CONFIG_SKIP_LOWLEVEL_INIT
> Changes for v13:
> - board/AndesTech/adp-ag101/Makefile: remove unused clean and distclean.
> Changes for v14:
> - No change.
> Changes for v15:
> - adp-ag101.h: drop NET_MULTI
> - Makefile: clean up Makefile
> Changes for v16:
> - No change.
> Changes for v17:
> - Fix boards.cfg (update only).
>
> MAINTAINERS | 11 +
> MAKEALL | 6 +
> board/AndesTech/adp-ag101/Makefile | 44 ++++
> board/AndesTech/adp-ag101/adp-ag101.c | 89 +++++++
> boards.cfg | 1 +
> include/configs/adp-ag101.h | 406
> +++++++++++++++++++++++++++++++++
> 6 files changed, 557 insertions(+), 0 deletions(-)
> create mode 100644 board/AndesTech/adp-ag101/Makefile
> create mode 100644 board/AndesTech/adp-ag101/adp-ag101.c
> create mode 100644 include/configs/adp-ag101.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
"'Tis true, 'tis pity, and pity 'tis 'tis true."
- Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
