Instead of writing directly to the GPR register, use mx31_set_gpr to setup
USBH2 pins.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
board/davedenx/qong/qong.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index 5b2830c..de32fb5 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -142,8 +142,8 @@ int board_early_init_f(void)
mx31_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
mx31_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
mx31_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
-
- writel(readl((IOMUXC_BASE + 0x8)) | (1 << 11), IOMUXC_BASE + 0x8);
+
+ mx31_set_gpr(MUX_PGP_UH2, 1);
return 0;
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
