On Thursday 13 October 2011 14:50:02 Matthias Fuchs wrote: > On 12.10.2011 10:44, Anatolij Gustschin wrote: > > PCI cards might need some time after reset to respond. On some > > boards (mpc5200 or mpc8260 based) the PCI bus reset is deasserted > > at pci_init_board() time, so we currently can not use available > > "pcidelay" option for waiting before PCI bus scan since this > > waiting takes place before calling pci_init_board(). By moving > > the pcidelay code to the new location using of the "pcidelay" > > option is possible on mpc5200 or mpc8260 based boards, too. > > > > Since pci_hose_scan() could be called multiple times, restrict > > the function to wait only during its first call and to ignore > > pcidelay for any further call (as pointed out by Matthias). > > > > Signed-off-by: Anatolij Gustschin <ag...@denx.de> > > Cc: Matthias Fuchs <matthias.fu...@esd.eu> > > --- > > > > Changes since first version: > > - extend to wait only during initial pci_hose_scan() call > > > > as pointed out by Matthias > > Tested on PMC440. Works fine. > > Acked-by: Matthias Fuchs <matthias.fu...@esd.eu>
Thanks. In this case a: Tested-by: ... would be even better. :) Thanks, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
