Hi Marek, On Wed, Oct 12, 2011 at 4:19 AM, Marek Vasut <marek.va...@gmail.com> wrote: > On Wednesday, October 12, 2011 02:30:57 AM Simon Glass wrote: >> Hi Marek, >> >> On Wed, Oct 5, 2011 at 10:05 AM, Marek Vasut <marek.va...@gmail.com> wrote: >> > On Wednesday, October 05, 2011 04:10:56 PM Simon Glass wrote: >> >> Hi Marek, >> >> >> >> On Fri, Sep 30, 2011 at 5:12 PM, Marek Vasut <marek.va...@gmail.com> >> >> wrote: >> >> > The Toradex T20 module uses 13MHz Xtal, so make the Xtal speed >> >> > configurable. >> >> > >> >> > Signed-off-by: Marek Vasut <marek.va...@gmail.com> >> >> > Cc: Simon Glass <s...@chromium.org> >> >> > Cc: Ben Warren <biggerbadder...@gmail.com> >> >> > Cc: Tom Warren <twarren.nvi...@gmail.com> >> >> > Cc: Stephen Warren <swar...@nvidia.com> >> >> > --- >> >> > arch/arm/cpu/armv7/tegra2/ap20.c | 9 +++++++-- >> >> > 1 files changed, 7 insertions(+), 2 deletions(-) >> >> > >> >> > diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c >> >> > b/arch/arm/cpu/armv7/tegra2/ap20.c index dc5f984..71d9f26 100644 >> >> > --- a/arch/arm/cpu/armv7/tegra2/ap20.c >> >> > +++ b/arch/arm/cpu/armv7/tegra2/ap20.c >> >> > @@ -31,6 +31,11 @@ >> >> > #include <asm/arch/scu.h> >> >> > #include <common.h> >> >> > >> >> > +/* The default XTal is 12MHz, some boards might use 13MHz one though >> >> > */ +#ifndef CONFIG_SYS_TEGRA2_XTAL_MHZ >> >> > +#define CONFIG_SYS_TEGRA2_XTAL_MHZ 12 >> >> > +#endif >> >> > + >> >> > u32 s_first_boot = 1; >> >> > >> >> > void init_pllx(void) >> >> > @@ -46,8 +51,8 @@ void init_pllx(void) >> >> > /* Set PLLX_MISC */ >> >> > writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc); >> >> > >> >> > - /* Use 12MHz clock here */ >> >> > - reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT); >> >> > + /* Use 13MHz clock here */ >> >> >> >> Change comment? >> >> >> >> > + reg = PLL_BYPASS_MASK | (CONFIG_SYS_TEGRA2_XTAL_MHZ << >> >> > PLL_DIVM_SHIFT); reg |= 1000 << PLL_DIVN_SHIFT; >> >> > writel(reg, &pll->pll_base); >> >> > >> >> > -- >> >> > 1.7.5.4 >> >> >> >> Regards, >> >> Simon >> > >> > Hi Simon, I'll probably also change the board.c to support this. But >> > then, can't the board.c be moved to arch/arm/cpu/armv7/tegra... and it's >> > functions exported via standard header ? Cheers >> >> Which board.c do you mean and which change do you need to make? > > Hi Simon, > > board/nvidia/common/board.c > > same as this patch does . >
Well there are several files called board.c: board/nvidia/common/board.c - Common things for Nvidia boards arch/arm/lib/board.c - Generic ARM things arch/arm/cpu/armv7/tegra2/board.c - Generic Tegra things Since this is to do with Tegra, I think it should stay where it is in ap20.c and you should just add a config. For now arch/arm/cpu/armv7/tegra2/board.c just deals with DRAM. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
