Hi Stefan, On Mon, 30 May 2011 16:10:34 +0200 Stefan Roese <s...@denx.de> wrote:
> Hi Anatolij and Detlev, > > On Monday 30 May 2011 09:45:08 Detlev Zundel wrote: > > >> Hm, I'm not sure I understand the situation, so please correct me. We > > >> have a "pcidelay" variable, which is used to wait before > > >> pci_board_init() (I'm not counting the semantically different usage in > > >> the esd boards). This does not fit your need, so you define > > >> pci_scan_delay which is used _after_ pci_init_board(), correct? > > > > > > yes, this is correct. > > > > > >> If this is correct, then why don't you keep your new delay also in the > > >> pci_init() function so that the delays are easily visible on code > > >> inspection? But wait, if this is only needed for this very board, then > > >> why don't we put the delay into digsys pci_init_board? Actually I think > > >> this is the best way, as on this board we always need the delay as PCI > > >> is not hotplug. > > > > > > The reason for not keeping new delay in pci_init() is: > > > pci_init_board() starts scanning the bus (calls pci_hose_scan()), so > > > when pci_init_board() returns, it is too late, the scanning is > > > already completed. > > Right. With this PCI reset "design", the current "pcidelay" option won't work > for these platforms. Too bad. > > But thinking more about it, couldn't your new code location supersede the old > one before pci_init_board()? If this really is the case (we would need to > check with users of this "pcidelay" env variable, Mattias?), then we could > remove the old code in pci_init() and only use your new version. We would > need > to use the old env variable name "pcidelay" though, since there are boards in > the field already using this version. > > Anatolij, what do you think? This should work, I think. I'll send a patch moving pcidelay code to new location. > Matthias, could you do some tests on some esd boards with the new version > when > available, to make sure that we don't break backwards compatibility? Would be great if Matthias could test the patch. Thanks, Anatolij -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot